您要查找的是不是：
- Different meshes employed to simulate fluid flow in TFB (tangential fired boiler) were discussed and mesh methods to decrease crossflow diffusion were investigated. 文中尝试并讨论了用于消减伪扩散的各种网格调整方法，并将数值结果与实验数据进行了对比。
- A numerical computation is carried out to simulate fluid flow and heat transfer of mixed convection for low Prandtl number fluid, background of which is continuous galvanizing baths. 本文以锅炉干排渣装置为背景,对抽象的理论模型具有隔板的平行通道内空气混合对流换热进行了数值模拟。
- In recent years, the lattice-Boltzmann method (LBM) has been developed into an alternative and promising numerical scheme for simulating fluid flows . 最近，格子-Boltzmann方法已经发展成为模拟流体流动的一种可替代并且非常有前景的新的数值计算方法。
- In the recent years, Lattice Boltzmann Method (LBM) has been developed as a new tool for simulating fluid flows, heat transfer and other complicated physical phenomena. 格子-Boltzmann方法是近年来得以迅速发展的一种模拟流体流动、换热和其他复杂物理现象的数值方法。
- Simulation fluid flow 模拟流体流动
- It is very important to couple geomechanics and fluid flow with 3D simulation software. 利用3维模拟软件把地质力学和液流结合起来则非常重要。
- Can be used for both on-off and throttling control of fluid flow. 可用作流体流量的启闭和节流控制。
- The computer simulation of fluid flow in pit furnace when large sized gears gas carburized has been done using the theory of hydrokinetics. 利用流体动力学的基本原理用计算机模拟了大尺寸齿轮在井式渗碳炉内进行气体渗碳时的流场分布。
- Design of downhole oil-water separation system and double fluid flow pump. 井下油水分离系统及往复式双液流泵设计。
- Measurement of fluid flow in pipes using orifice, nozzle, and Venturi. 用孔板,管接头和文丘里管测量管道中的液体流量。
- This study is a reference in understanding fluid flow mechanism in fract... 该研究对于认识缝洞型油藏流体流动机理具有一定的借鉴意义。
- Because of fluid flow through the liquid and transfer the energy impact. 由于流道内液体是通过液体撞击而传递能量。
- Ball chatter and internal damage may result if fluid flow is too turbulent. 如果流体出现比较严重的湍流，可能导致球体震动和内部损坏。
- In this paper, the computer simulation method for fluid flows and Lattice Automata method are studied in detail. 摘要针对流体系统的特点，研究了模拟流体流动的格子自动机方法。
- The numerical simulation of the fluid flow and the thermal transfer of the above optimized structure shows that the highest temperatures of chips were 358.34 and 361.52 K,respectively,meeting the requirement of the chip for the work temperature. 对以上得到的优化结构的微槽冷却热沉的流体流动和传热进行了数值模拟;得到芯片的最高温度分别为358.;34 K和361
- The authors first present the agent-oriented early requirement analysis that is increasingly important in distributed computing, and a distributed simulation environment of fluid flow that will be used for the case study. 本文首先提出了分布计算中将日益重要的面向Agent先期需求分析,然后通过总结多年来流体流动问题应用系统的计算机仿真的进展与经验,提出了作为分析案例的流体流动分布仿真环境以及具有需求工程意义的问题领域通用分布仿真过程。
- The 2D and 3D models for sloshing simulation in VLCC tanks are presented. And their feasibility are validated by comparison fluid flow and pressure values of 2D model and 3D model. 分别采用3D模型和2D模型对VLCC液舱进行晃荡仿真;通过对两个模型的流体流动情况和对应位置压力的比较;得出短期搜索及长期分析中采用2D模型方案进行VLCC液舱晃荡仿真分析是可行的结论.
- In view of interaction of fluid flow field and rheology field, the numerical simulation model in pressing of oil plant was developed on the basis of the theory of fluid-solid interaction. 考虑植物油料的可变形和流变,植物油料的压榨过程是一个渗流场和流变场耦合渗流问题。
- Techniques borrowed from the ring laser gyro can be adapted to fluid flow measurement. 借环形激光陀螺仪的技术，加以改进使之适用于流体流量的测量。
- Can be installed in both the horizontal or vertical positions, provided fluid flow is upward. 可以安装在水平位置或水流方向朝上的垂直位置。
