您要查找的是不是：
- It also presents a physical simul ation system for the FMS. 并介绍了一种柔性加工系统的实验室模拟方法。
- Virtual machining simulation is mainly consistof two parts, geometry simulation and physical simulation. 包括几何仿真和物理仿真两部分。
- Parallel efflux theory has been used so that a new method of physical simulation of aerodynamic heating has been developed. 把平行射流理论应用于座舱蒙皮外表面气动加热的物理仿真，提出了气动加热物理仿真的新方法。
- The motive and content of enthalpy wheel humidifier mathematical and physical simulation model has been described. 设计了焓轮加湿器的数学物理仿真模型,并采用有限差分法得到了仿真模型的数值解。
- The main research methods include empirical formula,physical simulation,numerical simulation and field measurement. 主要的研究方法有经验公式法、物理模拟、数值模拟和现场实测。
- The effect of neglect of geostrophic action shall be considered in making a physical simulation for a large-scale sea area. 对具有较大尺度海域的模拟需要考虑地转缺失的影响。
- Abstract: The physical simulation of aerodynamic heating on outside surfaces of cabin skins is an important basis of cabin thermal process tests. 文摘:座舱蒙皮外表面气动加热的物理仿真是座舱热特性试验研究的重要基础。
- The research on physical simulation is not under way deeply due to the sophistic mechanism of cutting and the difficulty in modeling. 物理仿真由于其切削机理复杂、建模难度大等客观原因,研究还不深入。
- Warm-hot control forging process of automobile spline shaft is investigated by using physical simulation and numerical simulation. 采用物理模拟和数值模拟相结合的手段,对汽车花键轴的温热控制精锻工艺进行了深入的研究。
- This paper points to the countermeasure engineering to carry the physical simulation experiment,and then catches up with concretely design parameters. 本文针对溜砂坡防治工程进行了室内物理模拟试验研究,并提出了具体的工程设计参数。
- Based on physical simulation of edge rolling process,the article analyzed the effection of V rolling and chamfer rolling on the plate profile. 基于中厚板在立轧轧边后板坯变形的物理模拟,分析了平辊立轧与倒棱轧制对中厚板断面形状的影响。
- Compared physical simulation with the numerical simulation, it shows that the empirical formulas built can be applied into the actual oilfields. 物理模拟实验与数值模拟结果的对比表明，所建立的经验关系式可以满足油田实际应用。
- This paper researches thethree-dimensional shape measurement technique of structure superface inthe physical simulation experimental facility. 本文对构造物理模拟实验装置中顶面三维面形测量技术进行了研究。
- Gyro simulation test of the high-speed rotatable projectile angular motion is one of the key technology of the physical simulation system. 高速旋转弹丸角运动的陀螺模拟测试是弹载机构物理仿真系统的关键技术之一。
- We also did some physics simulation works on the BES-III luminosity R&D. 也还进行了BES-III 亮度监测器设计物理方案的模拟研究工作。
- The physical simulation of aerodynamic heating on outside surfaces of cabin skins is an important basis of cabin thermal process tests. 座舱蒙皮外表面气动加热的物理仿真是座舱热特性试验研究的重要基础。
- Software System Design of Reentry Vehicle Six- DOF Semi Physical Simulation 再入体六自由度半实物仿真软件系统设计
- The physical simulation test for depletion drive in carbonate reservoir in Lunnan buried hill is conducted according to the real reservoir conditions of modeling. 摘要全面模拟油藏实际条件，对轮南古潜山碳酸盐岩油藏进行了衰竭驱替物理模拟实验。
- Based on Trias Chang6 delta sandbody in Ordos basin as simulation antetype, physical simulation of formation process in distributary channel and debouch bar of delta is conducted. 文中以鄂尔多斯盆地三叠系延长统长6三角洲砂体为模拟原型，对三角洲前缘水下分流河道及河口坝形成过程进行了较深入研究。
- Based on the acoustical principle of similarity,the realization way of the acoustical physical simulation experiment was discussed,which was testified by measurement results. 本文依据声学相似律理论，重点讨论了声学物理模拟实验的实现方法，并通过现场实验测量结果验证了模型实验测量结果。
