您要查找的是不是：
- Screw cover onto valve body. 用螺丝将阀盖固定在阀体上。
- Screw the cover onto the valve body. 将阀盖旋在阀体上。
- Peter nailed the cover onto the box. 彼得把箱盖钉在木箱上。
- You can hook the cover onto the material underneath. 你可以把罩面儿钩挂在底衬上。
- If the cage disengages prematurely, simply use the cage as a tool to screw the check valve seat from the valve body. 如果预先拆卸阀笼，就可以将阀笼作为工具从阀体上旋转止回阀阀座。
- Remove the body bolts from the valve body. 从阀体上拆卸阀体螺栓。
- Lift retainer and check assembly from valve body. 从阀体内取出护圈和止回阀总成。
- Apply silicon sealer/lubricant to the inner and outer diameters of the flange kit gasket, and press the gasket onto the valve body end. 将硅密封/润滑剂施加在法兰组件垫圈的内径和外径上，将垫圈压在阀体端口上。
- Turn handle to be perfectly perpendicular to valve body. 将手柄旋转到与阀体完全垂直的位置。
- Remove the bolts and cover, realign the diaphragm assembly, and place the cover back on the relief valve body. 拆卸螺栓和阀盖，重新校准隔膜总成，并将阀盖放回到安全阀阀体上。
- Place cover onto spring with internal guide on cover positioned inside end coil. 将阀盖放置在弹簧及其内置阀盖上的引导装置,定位内置末端线圈。
- Place the cover onto the spring with the internal guide on the cover positioned inside the end coil. 将阀盖及阀盖上的内部引导放置在弹簧上,定位内部端线圈。
- Remove the body bolts from valve body using Allen Key. 采用内六角扳手从阀体上拆卸阀体螺栓。
- Installation suggestion: valve body vertical and upward. 建议安装方式，阀体垂直向上。
- IMPORTANT! Flow must always be in direction of arrow on valve body. 重要提示！水流流向必须与阀体上的箭头方向一致。
- Insert valve body through mounting hole and seat lugs. 将阀体插入安装孔和密封连接盘。
- Press stem/ball into valve body and remove from open end. 将阀杆/球体压入阀体内，并且从开口端卸下来。
- The top of retainer must drop just below threads in the valve body. 护圈上方必须放置在阀门阀体螺纹以下。
- A dual-semisphere check valve for fluid delivery system is composed of valve body, bottom and top valve seats, valve bonnet, flap, spool, sealing washer, rotary rod, pressure screw, handwheel and nut. 一种双半球截止阀，涉及各种流体输送系统截断或接通的装置。包括阀体、下阀座、上阀座、阀盖、阀瓣、阀芯、密封垫圈、旋转杆、压紧螺丝、手轮和螺母等。由于设置了两个阀座和双半球阀瓣，提高了外密封和内密封效果。
- Position the bottom flange cover on the bottom of the relief valve body and secure by hand tightening the four bottom bolts. 将底部法兰盖放在安全阀阀体底部上,用手旋紧四个底部螺栓加以紧固。
- 今日热词
-
- 深远海浮式风电平台 - deep-sea floating wind power platform
-
- 京雄高速公路 - Beijing-Xiongan expressway
-
- 农业及相关产业增加值 - the added value of agriculture and related industries
