您要查找的是不是:
- Sanitary Ball Weld Check valve 卫生级焊接止回阀
- Check valve guiding shall be plastic to plastic. 止回阀引导装置应该是塑料对塑料。
- Remove check valve and valve seal from booster. 从倍力器上卸去逆止阀和阀门密封。
- Connect vacuum hose to booster check valve. 连接真空软管到增压器检测阀。
- To test for tightness of second check Valve. 检测第二止回阀的密封性。
- ANSI FLANGED SWING CHECK VALVE CLAS. 美标法兰止回阀。
- Reassemble the Check valve modules. 重新组装止回阀模块。
- Connect vacuum hose to booster check valve . 连接真空软管到增压器检测阀。
- Purpose: To test check valve No. 1 for tightness. 目的:检测止回阀1号的密封性。
- Sticky outlet check valve poppet. 1检查过滤的进水管线。
- CAUTION: The check valve spring is in compression. 警告:止回阀弹簧处于压缩状态。
- Placing the check valve in parallel with the pressure-reducing valve allows free return flow when the weld cylinder retracts. 将止回阀与减压阀门允许自由回流焊接钢瓶时收回。
- If it does not drop but there is a small leakage at test cock No. 2, then No. 1 ball valve has a small leak, but No. 1 check valve is tight. 如果水柱没有下降,但是测试旋塞2号有点泄漏,则1号球阀有点泄漏,但是1号止回阀密封紧密。
- If it slowly drops and does not run out through test cock No. 3, then No. 2 ball valve has a small leak, but No. 2 check valve is tight. 如果水柱慢慢下降,并且没有从测试旋塞3号流出,则2号球阀有点泄漏,但是2号止回阀密封紧密。
- Remove the four screws holding the first check valve cover. 拆卸固定第一止回阀阀盖的四个螺丝。
- A check valve may be required ahead of the backflow preventer. 此时在防回流阀前面可能需要安装一个止回阀。
- Service the second check valve using steps 2 through 12. 按照第2步至第12步维修第二止回阀。
- Velan Small Forged Steel Check Valves. 锻造低温闸阀、截止阀和止回阀。
- FORGED STEEL PISTON CHECK VALVES. 锻钢活塞止回阀用于水平和垂直管道。
- Globe Stop Check Valves Major Features. 球形截止止回阀主要特点。