您要查找的是不是：
- SLTA Signaling Link Test Act 信令链路测试作用
- SLTC Signaling Link Test Control 信令链路测试控制
- SLTM Signaling Link Test Message 信令链路测试报文
- SLTMA Signaling Link Test Message Acknowledgement 信令链路测试通报收到
- signaling link test control 信令链测试控制
- signaling link test message 信令锭测试消息
- Signaling Link Code = the member number within a link set. Signaling Link Code = 链路群内的成员号。
- Signaling Link Code--he member number within a link set. Signaling Link Code -- 链路群内的成员号。
- The CHG:SLK command is used to change the minor state of a signaling link. CHG:SLK 命令用于更改信令链路的次级状态。
- Major State of Link = the major equipage status of the signaling link. Major State of Link = 该信令链路的主要设备状态。
- The device routes or switches incoming messages to an outgoing signaling link using routing information within the multitiered SS7 message. 该装置为利用多层七号信令报文中的路由信息，为进来的报文送到输出的信令链路上建立路由或进行交换。
- Signaling links are usually equipped in pairs in SS7 networks. 信令链路常常是成对地装配在 SS7 网络中。
- This state Indicates that the AP-DS1 is available for use by an RCS signaling link. 该状态表明 AP-DS1 可供 RCS 信令链路使用。
- Link Node Address (Group and Member) = the node within the IMS ring on which the signaling link terminates. 链路节点地址 (Group and Member) = IMS 环路内信令链路终止的节点。
- Signal unit initial alignment - invokes initial alignment prior to activating or restoring a signaling link. 信令单元初始定位 -- 在激活或恢复信令链路之前调用初始定位。
- The s7ln form (SS7 link) is used to define the individual SS7 signaling links. s7ln 表(SS7 链路)是用于定义各 SS7 信令链路。
- Far-End CLLI = the Common Language Location Identifier (CLLI) that is associated with the STP or 5ESS DCS at the far end of this signaling link. Far-End CLLI = 与该信令链路远端处的 STP 或 5ESS DCS 相关的公用语言位置标识符 (CLLI)。
- Each signaling link may accommodate a traffic load of approximately 40 percent of its maximum load capacity. 每一信令链路可容纳其接近最大负载能力 40%25 的话务量。
- Disposal of Call Waiting Software is used in the case that a new call request arrives when the 2B channels are used to access Internet. A new method is adopted in the implementation of Data Link Test Software. 呼叫等待处理完成的主要功能是：当用户的2B通路都被占用时，如果有新呼叫到来，用户可以选择接受或者拒绝。
- Major State of Link-this field contains the major equipage status of the signaling link. Major State of Link -- 该信令链路的主要设备状态。
