您要查找的是不是：
- Rotary Inertia and Servo Motor 惯量与伺服电动机
- Slotted on shaft end ,suitable for DC motor and servo motor. 轴头开槽，适用于直流电机，伺服电机。
- The result also denotes rotary inertia and the shear formation of the beam have significant effect on the high frequencies. 粘结层剪切弹性模量对一阶频率影响较小；考虑梁的剪切变形和转动惯量时，对梁的高阶频率影响较大。
- CNC system imported from Taiwan and servo motor imported fro japa are adopted. 一、采用台湾进口电脑控制系统和日本进口伺服电机。
- This paper give an advice that we can realize closed cycle control of feeding shaft by proportional valve and linear grid ruler instead of servo emplifier and servo motor. 利用比例阀和线性光栅尺配合使用替代伺服放大器和伺服电机实现进给轴的闭环控制。
- Ideas of inertia and complacency are both wrong. 无所作为和骄傲自满的论点都是错误的。
- There are three types motors with reversible motor and servo motor and reactivity motor. 使用了三种不同类型的电机、可逆电机、伺服电机和反应式电机；
- Each slide is driven by a separate ballscrew and AC servo motor. 每张幻灯片是由一个单独的滚珠丝杠和交流伺服电机。
- INFLUENCES OF THERMAL LOAD, ROTARY INERTIA AND NONLINEAR DEFORMATION ON WAVE PROPAGATION IN PIEZOELECTRIC LAMINATED CYLINDRICAL SHELLS 波在考虑热载荷和转动惯量效应的非线性大变形多层压电层合壳内的传播研究
- There is a actual example of application of rotary inertia. 该文通过一个实例来阐述选择惯量的具体应用。
- Adopting high slip motor and increasing the rotary inertia of the rotating parts is an effective approach to achieving good power-saving effect of beam pumping units. 采用高转差率电动机，并增加旋转件的转动惯量，是综合提高游梁式抽油机节能效果的有效途径。
- Remove the AC servo motor from the bracket. 从支架上取下马达。
- The particle motion is dominated by inertia and gravity effects. 粒子的运动是由惯性和重力作用决定的。
- Attach the new AC servo motor to the bracket. 装上新马达到支架。
- Exchange the servo motor 2HP in spiral. 螺旋交流伺服马达2HP。
- Feed use of the AC servo motor torque of the motor. 进给部分电机采用交流伺服电机转矩大。
- Main Control Unit, two-channel electrometer and servo controller. 主控制器单元,带有两通道静电计和伺服控制器。
- The main factors influencing power saving of the beam pumping unit with high slip motor are pumping speed of the unit, slip ratio of the motor and rotary inertia of rotating parts. 指出影响使用高转差率电动机的游梁式抽油机节能的主要因素是抽油机的冲次、电动机转差率和旋转件的转动惯量。
- Notes:Weight and rotary inertia are approximate value calculated by the greatest shaft-hole dia. of Y type hole. 注：重量、转动惯量是按最大轴孔直径Y型孔计算的近似值。
- Mill spindle is used by either inverter or servo motor. 铣床主轴采用变频马达或伺服主轴。
