您要查找的是不是：
- Clean posts and clamp with wire brush. 用钢丝刷清刷接线柱和夹子。
- The third patient - use wire brush to brush the gum. 第三位病人患慢性齿龈病-用钢丝刷刷齿龈。
- The second patient - use wire brush to brush the anus. 第二位病人患慢性痔疮-用钢丝刷刷肛门。
- In this case, manual cleaning using a wire brush or scraper is not efficient. 而通过用钢丝刷、刮刀手动除去这些杂质的效果并不理想。
- Use sand cloth or steel wire brush to clean both tube and cut to bright metal. Steel wool is not recommended. 使用纱布或钢丝刷清除管道和切割部位,使其金属表面发光发亮。建议不要使用钢丝绒。
- Use sand cloth or steel wire brush to clean both ends to a bright metal finish. Steel wool is notrecommended. 使用纱布或钢丝刷清除管道和切割部位,使其金属表面发光发亮。建议不要使用钢丝绒。
- Wire brush potato into the pan-ping,lao cheng Pie, adding a little salt, golden color, crisp texture. 洋芋擦丝，放入平锅内，烙成饼状，加入少许盐水，色泽金黄，口感香脆。
- Do brush the rubber off with a wire brush or fine sandpaper to get out any particles stuck in the sticky rubber. 要用金属刷子或高质量的砂纸刷掉或擦掉卡在粘胶的任何橡胶颗粒。
- Once back to bare wood, raise the grain by rubbing briskly with a stiff wire brush. 一旦变回光秃的木材，用坚硬的钢丝刷轻快地摩擦使木纹隆起。
- Use the sandpaper or wire brush to thoroughly clean the copper sheeting, so that any sulphide or other light corrosion is removed. 使用砂纸或钢丝刷，彻底清洁铜薄膜，因此，任何硫化物或其他轻腐蚀被删除。
- Wire brushing is another commonly used cleaning mechanism. 钢丝刷是另一个常用的清洁机制。
- Traditionally, the removal method has been sanding, scraping and wire brushing. 传统的清除方法是打磨、刮削和用钢丝刷刷洗。
- Remove corrosive salts, chalk marks, soil or other contaminants and foreign matter by brushing the steel with a stiff fiber or wire brush or a combination of both. 用硬纤维、钢丝刷或二者之一擦拭钢材表面除去附着的锈盐、粉斑、油迹及其他污染物。
- Suitable eye protection must be worn when using wire brushes, scrapers or chipping hammers. 当使用钢丝刷、刮刀或凿锤时必须佩戴恰当的眼防护用品。
- We should brush our teeth at least twice a day. 我们每天应该至少刷两次牙。
- Brush off the fuzz that has blown on. 把被风吹上去的绒毛刷掉。
- oval steel wire brush without handle 无柄椭圆钢丝刷
- A kite dangles from a telephone wire. 一只风筝悬挂在电话线上晃来晃去。
- Removal of loose rust, loose mill scale and loose paint by chipping, scraping, sanding and wire brushing to a specified degree. 通过手动工具削、刮、刷去松散的锈迹、氧化皮、漆皮,以达到指定等级。
- Removal of loose rust, loose mill scale and loose paint by power tool chipping, decaling, sanding, wire brushing and grinding to a specified degree. 用电动工具削、磨、刷去不牢固的锈迹、氧化皮、漆皮,以达到指定等级。
