您要查找的是不是：
- Reynolds turbulence model 雷诺应力湍流模型
- The Baldwin Lomax turbulence model was used for high Reynolds number flows. 湍流计算采用了Baldwin-Lomax代数模型.
- The Reynolds averaged N S equations are solved with implementation of the Baldwin Lomax turbulence model in the structured grid. 在结构网格区内 ,采用 B-L湍流模型 ,求解雷诺平均 N-S方程。
- Abstract Based on Reynolds stress turbulence model,airflow fields within urban street canyons under different building heights were simulated. 摘要 应用雷诺应力湍流模型,模拟了不同高度比的城市街道峡谷的气流场。
- The effect of swirl number on thermal No formation in swirling diffusion combustion is studied by numerical simulation, using the Reynolds stress equation turbulence model, EBU-Arrhenius combustion model and presumed-PDF NO formation model. 本文对旋流扩散燃烧进行了数值模拟，研究旋流数对热NO生成的影响，其中对湍流采用Reynolds应力方程模型，对燃烧采用EBU－Arrhenius模型，对热NO生成采用设定PDF的模型。
- Numerical calculation of the free water vortex is carried out by using Reynolds stress turbulence model and PISO algorithm.VOF (Volume of Fluid) method is used to deal with the free surface problem. 摘要采用雷诺应力湍流模型和PISO算法对自由水涡的运动全过程进行了仿真模拟，运用流体体积(VOF)模型处理自由表面问题，通过模拟计算得到了自由水涡的详细结构和运动过程。
- The flowpattern in the swirl tube separators is simulated by using the turbulence model, which is a hybrid between an algebraic stress model (ASM) and a full Reynolds stress model (RSM). 用介于ASM和RSM之间的一个混和模型，对涡管分离器中的流场进行了理论计算，得出了涡管分离器中的流场分布规律。
- Baldwin-Lomax Turbulence model is applied to programming. 程序采用Baldwin－Lomax模型。
- The Reynolds averaged N-S equations are solved using SST turbulence models the entire flow area. 整个流动区域采用SST湍流模型，求解了雷诺平均N-S方程。
- Baldwin-Lomax turbulence model is implemented in Navier-Stokes flow solver. 湍流计算采用了Baldwin-Lonax代数紊流模型。
- Reynolds Stress Turbulence Model(RSTM) 雷诺应力模型（RSTM）
- low Reynolds number turbulence model 低雷诺数的湍流模型
- Two-fluid large eddy turbulence model is applied to research the movement of the sand clouds in quiescent water. 摘要本文采用双流体大涡紊流模型对静水中泥沙云团下落过程进行了研究。
- As a numerical method of turbulence, large eddy simulation (LES) has many advantages of both direct numerical simulation and turbulent model simulation, especially when high Reynolds gas-particle turbulence being simulated. 大涡模拟作为近年来备受关注的湍流数值模拟方法，同时具有直接模拟和模型模拟的很多优点，在研究高Reynolds数气粒多相湍流流动中气相湍流拟序结构与颗粒的相互作用方面发挥了重要而独特的作用，已成为当今世界上流体力学工作者的热门研究主题。
- The weakly compressible fluid control equations and the large eddy simulation turbulence model are expounded. 摘要阐述了二维弱可压缩流体流动控制方程和大涡模拟湍流模型。
- Reynolds averaged Navier Stokes equation solution techniques were used to calculate the total pressure loss. Baldwin Lomax algebraic turbulent model is used as a turbulent model. 总压损失的计算采用Reynolds平均Navier-Stokes方程求解技术,紊流模型采用Baldwin-Lomax代数紊流模型。
- Rodi,W., Turbulence Model and Their Application in Hydraulics,1980,Monograph,IAHR.Delft.The Netherlends. 洪益平;交汇河段的模型及在三峡库区水污染控制中的应用;清华大学博士论文;2000年.
- The Launder &Ying algebraic Reynolds stress turbulent model with hybrid finite analytical method is applied to simulate the secondary current in the compound channel. 摘要采用L-Y雷诺应力模型，对水面和固壁边界条件进行有效的处理，结合混合有限分析法数值模拟了复式断面明渠二次流流动。
- Turbulence Modeling and Closure. Algebraic Models. Transport Models. 29紊流模式与封闭性。代数模式。传输模式。
- D. C. Wilcox, Turbulence Modeling for CFD, DCW Industries, 1st ed., 1994. 杨瑞珍,“紊流模式在工程上之应用”,国立成功大学工程科学系”,1997。
