您要查找的是不是：
- Remove bulb socket from lamp. 从灯上拆除灯泡插座。
- Remove sidemarker socket from lamp. 从灯上拆卸侧面识别信号灯插座
- Rotate sidemarker bulb socket counterclockwise grasp and pull from lamp. 逆时钟旋转侧面车种识别信号灯灯泡插座，抓紧插座并从灯中将其拔出。
- Remove bulb element from fog lamp. 从雾灯上拆卸灯泡元件。
- Position the bulb socket in the lamp and rotate clockwise. 将灯泡灯座置于灯中，并顺时针转动。
- Rotate turn signal bulb socket counterclockwise, pull on bulb to remove. 逆时钟旋转转向信号灯灯泡插座，拔下灯泡。
- Turn bulb socket 1/4 turn clockwise. 顺时钟旋转灯泡插座1/4圈。
- Pry lamp lens from lamp housing. 从灯泡外壳处探测灯的灯罩。
- Pull lens downwarRemove it from lamp housing. 将灯罩向下拉。将其从灯的外壳上拆下。
- Remove bulb from socket. 从插座将灯泡拆下。
- Using a small flat blade, carefully pry each corner of lens outward from lamp. 使用小型平头工具，小心地撬出灯罩的每一个角。
- They were pretty basic, and the bulb socket was grounded to the metal base of the signal assembly, which was bolted through the plastic faring into the steel faring bracket. 他们是非常基本，而且灯泡插座的接地的金属基底的信号大会，这是通过塑料螺栓的钢航天航天支架。
- I'm an interpreter.I'm not supposed to know a power socket from acomputer terminal. 我是台解译器，我也不知他们的电脑这么不友善
- A light - bulb socket. 灯泡插座。
- This is caused by considerable lock contention on the UDP socket lock when transmitting through a single socket from multiple threads. 这是由于，当从多个线程通过单个套接字 传递数据时，在UDP套接字锁上产生的大量锁竞争导致的。
- I didn't find the exact H4 bulb socket that I was looking for, but I found a couple H4 sockets that would do. 我没有找到确切的H4灯口灯泡插座，我正在寻找，但我发现一对夫妇H4灯口插槽，将尽。
- This type of bulb screws into the socket. 这种灯是拧到灯座上的。
- IS THE KEY-IN LAMP BULB OPEN OR SOCKET DAMAGED? 钥匙灯泡或插座坏了吗?
- REMOVE AND INSPECT THE SEAT BELT WARNING LAMP BULB. 移走并检查安全带警报灯泡。
- Remove spring clip securing bulb to fog lamp. 拆卸用以固定灯泡至雾灯的弹簧夹子。
