您要查找的是不是:
- Remote Front Panel 遥控正面仪表板
- The front panel houses a bridge-current meter. 正面板上装有桥式电流表。
- Black Anodized front panel with engraved writing. 黑色,经过处理的雕刻效果的前面板。
- Front Panel Keypad with DTMF or Pulse Dialing. 带有DTMF或脉冲拨号的前面板键盘。
- High quality aluminium case and front panel. 高品质的铝案件和前面板。
- Front panel is NEMA 4/IP65 using gasket supplied. 前面板是消防防灾4/IP65使用垫圈供应。
- The lower front panel differs from that of the 308 hatchback. 较低的前面板不同于的308掀背车.
- Adjustment with the front panel reach high precision. 前面板软件校正精密度高。
- The vest as a protective padded front panel with three pockets. 在背心正面有保护垫料有三个口袋。
- Through the keyboard located on the front panel it is possible to display the amplifier main measures and to set or modify the relevant thresholds and pre-settings (underpower alarm, remote controls, monitoring point signals, etc. 通过位于前面板的键盘,显示放大器的主要的尺寸和设置或更改相关的开端和预设置是可能的(低压报警,遥控控制,监视要点信号,等等。)
- Attention must be paid that the gasket is seated correctly on the front panel. 必须注意垫片应准确安放在前面板中。
- To remove the front panel plate from the unit, use the following procedure. 要从本机上取下前面板框,执行下列步骤。
- The magician visibly removes three of the candy canes and closes front panel. 魔术师可看见去除三棒棒糖和关闭面板。
- Cosmetically, the ONLY difference is the RS logo on the front panel. 从外观设计上看,RS版本的器材只是在面板上增加了RS的标志。
- Spreading the lower side of the front panel plate outward( arrow B), detach the plate from the body. 向外侧拉伸前面板框的底边(头B)把板从机体上卸下。
- Therefore if the allowable surface is known, the dimension of the front panel can be determined. 因此若知道允许面压也可确定防冲板的尺寸。
- The source code which contains the front panel push-button control and the LED lamp demonstrated, Asm. 一个包含前面板按钮控制和LED灯显示的源代码。
- New series of compact synchronous controllers, built into a standard DIN housing and designed for front panel mounting. 新系列的精简型同步控制器,装有标准的DIN外壳,前面有安装面板。
- The drain bottle holder is provided behind the front panel for easy to check the drain water level. 前面门内面设置了透明排水塑料桶,便于观察水位。
- Front panel was set on the top to protect the fender and reduce the surface pressure. 前方设置防冲板,保护护舷,降低面压。