您要查找的是不是:
- Reinforcement composite layer 加筋复合垫层
- Ceramic Particle Reinforced Composite Layer Produced by Light Beam Surfacing 聚焦光束堆焊生成陶瓷颗粒增强的复合材料表层
- Study on Laser Cladding of Wear-Resistant SiC Particle Reinforced Composite Layer on Aluminium Alloy Surface 铝合金表面激光熔覆SiC颗粒增强复合耐磨涂层研究
- Using a prefabricated porous ferroboron lump, a surface composite layer was made on gray cast iron matrix, with a common casting method. 通过预先制备带有孔隙的硼铁合金预制块,用普通浇注的方法,获得以灰铸铁为基的铸造表面复合材料。
- Intermetallic compound foam reinforced aluminium alloy surface composite layer are obtained by solution treatment after low pressure Casting. 通过低压铸造后固溶处理的方法,获得了网状金属间化合物增强铝合金表面复合层。
- Metal matrix composite layer reinforced in situ ZrC particles was formed by laser cladding overlapping on the medium carbon steel. 采用激光熔覆搭接技术,在中碳钢基体上制备出原位析出的颗粒增强金属基复合材料表层。
- The influence of WC content, coating treatment on quality and wear-resistance property of composite layer was studied by using metallographic studying and wear examination. 通过金相观察、磨损实验研究了WC颗粒含量及WC包覆.;性处理对渗层质量和渗层耐磨性的影响。
- Based on the action of ultrasonic-electrodepositing,the technique of preparating nanocermet(Ni-SiC) composite layer on the surface of metal substrates was studied. 基于超声电沉积复合作用,研究在金属表面获得纳米金属陶瓷复合镀层的基本工艺。
- The vanadium carbide/high chrome cast iron composite layer was formed on the surface of low-cost ZG310-570 by combining LFC process and casting penetration process. 结合消失模铸造工艺和铸渗表面强化技术,在廉价的ZG310-570表面形成一层碳化钒/高铬铸铁复合层。
- Resin Transfer Molding(RTM) is the fast developing process for manufacturing fiber reinforced composite recently. 树脂传递模塑工艺(Resin Transfer Molding,RTM)是近年来纤维增强树脂基复合材料制备工艺中发展较快的工艺。
- This essay introduced a new fibre reinforced composite-multiaxial warp-knitted reinforced composite (MWK). 文章介绍了以经编多轴向织物为增强材料的复合材料。
- The influence law of particles content in the solution, solution temperature, stirring speed, surface activator etc on the particle content in Ni-P/PTFE composite layer was studied. 探讨了粒子悬浮量、镀液温度、搅拌速度、表面活性剂含量及pH值等工艺条件对Ni-P/PTFE复合镀层中PTFE粒子的含量影响。
- Magnesite composite materials stove body and is a magnesium oxide-based glass-fiber reinforced composite materials. 菱镁复合材料灶体这是一种以氧化镁为主的玻璃纤维增强复合材料。
- The results show that the hard materials increase with the WC content increasing.The composite layer has the best quality and the least wear extent as the WC is 50%.It is easier to mak... 结果表明:随着膏块中WC颗粒含量的增加,渗层中的硬质相也相应增加,在加入50%25WC时渗层质量最好,磨损量最小,且经过包覆改性处理后的WC更容易形成优良渗层。
- The soldiers held the fort desperately till reinforcement arrived. 战士们拼死坚守阵地,直到援军到来。
- A novel fiber reinforced composite with natural vegetable fiber(NVF) as reinforcer and plasticizied natural vegetable fiber as matrix was studied. 报道了一种全天然植物纤维复合材料。该材料是以塑化的天然植物纤维(木粉)作为基体树脂,以天然植物纤维(剑麻)作为增强材料。
- In the paper,the finite element analysis results indicate that the fiber reinforced composite splint is superior to the steel splint. 通过对纤维增强复合材料锚杆托板与钢托板的有限元分析比较,得出了纤维增强复合材料锚杆托板优于钢托板的结论。
- In the paper the elastoplastic constitutive relations of unidirectional fiber reinforced composite materials were modeled numerically. 本文对单向连续纤维增强复合材料的弹塑性本构关系进行了数值模拟。
- ILSS result of carbon fiber reinforced composite shows that the matrix is suitable for hot-melt carbon fiber winding composite material. 碳纤维增强复合材料层剪强度测试结果表明,基体适用于纤维热熔法缠绕复合材料。
- In the paper, the finite element analysis results indicate that the fiber reinforced composite splint is superior to the steel splint. 通过对纤维增强复合材料锚杆托板与钢托板的有限元分析比较,得出了纤维增强复合材料锚杆托板优于钢托板的结论。