您要查找的是不是：
- WHILE ROTATING THE TIRE, OBSERVE THE RR WHEEL SPEED SENSOR SIGNAL. 旋转轮胎是，观察右后轮速感知器信号。
- REPAIR THE RR WHEEL SPEED SENSOR HARNESS AT THE POINT WHERE THE CODE SET. 修理右后轮速度感知器电线束的代码设定点。
- RR WHEEL SPEED SENSOR CONTINUITY 右后轮速度感知器连续
- RR Wheel Speed Sensor 右后轮速感知器
- ARE ANY WHEEL SPEED SENSOR TROUBLE CODES PRESENT? 是否存在一些轮速故障代码?
- DOES THE RR WHEEL SPEED MATCH THE OTHER WHEELS? 右后轮速度与其他轮匹配?
- WHILE ROTATING THE TIRE, OBSERVE THE LF WHEEL SPEED SENSOR SIGNAL. 当转动轮时，观察左前轮速度感知器信号。
- WHILE ROTATING THE TIRE, OBSERVE THE LR WHEEL SPEED SENSOR SIGNAL. 在转动车轮胎的同时观察左后轮速度感知器信号。
- REPAIR THE LR WHEEL SPEED SENSOR HARNESS AT THE POINT WHERE THE CODE SET. 修理左后轮速度感知器电线束的代码设定点。
- INSPECT ALL WHEEL SPEED SENSOR HARNESS CONNECTORS FOR CORROSION OR WATER CONTAMINATION. 检查所有轮速感知器电气配线接头的腐蚀或水污染。
- If any other wheel speed sensor diagnostic trouble codes are present, repair them before proceeding with this test. 如果任意轮速感知器诊断故障代码出现，在进行该测试之前将它们修复。
- While the toothed ring mounted on the hub circumvolving, the wheel speed sensor picks up the rotary motion, translates it into electronic signal for the ECU. 安装在轮毂上的齿圈随车轮旋转，轮速传感器拾取旋转动作转化为电信号传递给ECU。
- Abstract: The function of the wheel speed sensor is to transform the wheel speed into the alternative voltage signal and send it to the electronic control unit (ECU) which will send ont relevant instructions according to the signal. 文摘:车轮速度传感器的作用是将车轮的转速转变为交变的电压信号，输送给电子控制系统(ECU)，并发出相应的指令。
- In operation, the wheel speed sensors at each wheel send electronic pulse signals to the control unit. 运转中,轮子速度传感器在各个轮子寄发电子脉冲信号到控制单元。
- CIntermittent LF Wheel Speed Sensor Signal 间歇左前轮速感知器信号
- Wheel speed sensor and circuits shorted together 轮速感知器和(−)电路短路
- THE RF WHEEL SPEED SENSOR CIRCUIT AND GROUND, CAB CAVITIES 6 AND 1 右前轮速感知器（minus;）电路和地，CAB槽6和11。
- REPAIR THE WHEEL SPEED SENSOR + CIRCUIT SHORTED TO GROUN 修理轮速感知器+电路对地短路。
- THE LR WHEEL SPEED SENSOR CIRCUIT AND GROUND, CAB CAVITIES 19 AND 1 左后轮速感知器（minus;）电路和地，CAB槽19和11。
- The Wheel Speed Sensor in ABS and the Signal Processing 汽车ABS轮速传感器及其信号处理
