您要查找的是不是：
- Push due to surface slope 江面坡度推力
- Drag due to surface slope 江面坡度阻力
- The boss gave him the push due to his careless work. 由于他工作不细心, 老板解雇了他。
- This tester is provided with a "Guard" terminal to prevent errors due to surface leakage. 本仪表装有保护环接线柱，用以纠正因表面漏电而造成的误差。
- The results showed that fructure of the component was mainly due to surface decarburation layer and poor roughness. 检验结果表明,表面脱碳层的存在及表面粗糙是导致构件断裂的主要原因。
- High conductive rate i. E. High shielding effectiveness due to surface nickel-plating and tinning or chemical processing. 表面镀镍锡或化学处理可提高表面导电率;即提高屏蔽性能.
- We are going to surface this road. 我们将要为这条路铺路面。
- Some students quit school due to poverty. 一些学生因贫困而辍学。
- Swelling effect is due to surface forces, including van der Waals attraction, electrostatic double layer and solvation repulsion. 膨胀效应是由于表面力 (VanderWaals吸引、双电层排斥及溶剂化排斥 )引起的 .
- Mr.Black bowed out of politics due to poor health. 布莱克先生由于健康不佳而退出政治生涯。
- Wettability improvement is due to surface roughness and introduction of functional groups including oxygen and nitrogen. 增加表面粗糙度和引入含氧、含氮高结合能官能团是改善材料表面润湿性的主要原因。
- Sale is down a bit due to the revaluation. 由于货币升值销售额有下降。
- Due to surface abrasion and Sideswipe can affect the image quality of output, users need to periodically change the photoptic. 由于表面磨损和擦痕会影响图像的输出质量，用户需要定期跟换感光器。
- The ship was due to sail the following morning. 这艘船定于第二天启航。
- The results show that the past's crack was due to surface repairing welding on its low intensity meterial area, such as unreasonable sharp-angle and unsmooth surface. 结果表明，大王柱的断裂是由于采用低强度材料进行表面补焊所致，其不合理的尖角设计以及表面加工粗糙也是造成其断裂的原因。
- The accident was due to her negligence. 这次事故是因她疏忽所致。
- His successes were largely due to luck. 他的成功主要靠运气。
- The main factors causing the decrease of fatigue strength of axle sleeves are stress concentration due to surface microfriction, microflaking pits and geometric shapes of samples. 造成套管疲劳强度下降的主要因素,是微动表面摩擦应力、微动剥落坑和试样几何形状三者引起的应力集中。
- Flies' feet stick to surfaces by suction. 苍蝇的脚借吸力可附着于物体表面上。
- The results show that the post's crack was due to surface repairing welding on its low intensity meterial area,such as unreasonable sharp-angle and unsmooth surface. 结果表明,大王柱的断裂是由于采用低强度材料进行表面补焊所致,其不合理的尖角设计以及表面加工粗糙也是造成其断裂的原因。
