您要查找的是不是：
- Methyl Methacrylate Polymer 甲基丙烯酸甲酯聚合体
- A series of cyanate ester/Polymer methyl methacrylate(CE/PMMA) interpenetrating polymer networks(IPN) was propared by the method of synchronism. 用同步法合成一系列氰酸酯/聚甲基丙烯酸甲酯(CE/PMMA)体系的互穿聚合物网络(IPN)。
- A series of cyanate ester/Polymer methyl methacrylate (CE/PMMA) interpenetrating polymer networks (IPN) was propared by the method of synchronism. 用同步法合成一系列氰酸酯／聚甲基丙烯酸甲酯(CE/PMMA)体系的互穿聚合物网络(IPN)。
- Plastics; determination of viscosity number and limiting viscosity number; part 6: methyl methacrylate polymers 塑料。粘度数和极限粘度数的测定。第6部分:甲基丙烯酸甲酯聚合物
- The influence of HCCP(high chlorine content polymer) such as PVC,CPE,CLR and CPVC on MMA(methyl methacrylate)/CR graft copolymerization was investigated. 研究了PVC、氯化聚乙烯（CPE）、氯化橡胶（CLR）及氯化聚氯乙烯（CPVC）等高氯聚合物（HCCP）对甲基丙烯酸甲酯与CR接枝共聚反应的影响。
- Polymer blends of poly(methyl methacrylate)(PMMA) and poly(stryene co acrylonitrile) with ~30 mass% acrylonitrile content(SAN) were prepared by solution mixing. 通过溶液共混制得不同组成的聚甲基丙烯酸甲酯 (PMMA)和苯乙烯 -丙烯腈共聚物 (SAN,其中AN的含量约为 30%25 (质量 ) )的共混物。
- ACR is a copolymer of methyl methacrylate with acrylate. ACR是一种甲基丙烯酸甲酯与丙烯酸酯类的共聚物。
- The polymer was prepared by copolymerizing vinyl sulfonate, methyl methacrylate( MMA) and methacrylic acid( MAA) in different proportions. 三元树脂由乙烯基磺酸酯、基丙烯酸甲酯(MMA)甲基丙烯酸(aa)不同的配比共聚而成。
- In benzene or ethyl acetate solution rates increase linearly with methyl methacrylate concentration. 在苯或乙酸乙酯溶液中其衰减速度随甲基丙烯酸甲脂浓度呈直线地增大。
- With methyl methacrylate the particle diameter increases linearly with conversion indicating particle aggregation. 采用甲基丙烯酸甲酯时，粒子直径随转化率呈直线增大，这就表明粒子发生了聚集。
- AgCl//PMMA organic-inorganic hybrid membrane was prepared by reverse microemulsion polymerization using methyl methacrylate(MMA) as oil phase. 以甲基丙烯酸甲酯(MMA)为油相,利用微乳液聚合技术制备了氯化银/聚甲基丙烯酸甲酯(PMMA)有机-无机杂化膜。
- The kinetics of graft copolymerization of SBS and methyl methacrylate in toluene initiated by BPO was investigated. 以过氧化苯甲酰(BPO)为引发剂,甲苯为溶剂,膨胀计法研究甲基丙烯酸甲酯与SBS接枝聚合反应动力学。
- We studied the dosage of methyl methacrylate (MMA) and density effect on the mechanics proper of CE/PMMA-IPN. 研究了甲基丙烯酸甲酯(MMA)的含量对CE/PMM-IPN体系的力学性能及密度的影响。
- Kinetics of methyl methacrylate (MMA) bulk polymerization is investigated in this paper. 摘要对甲基丙烯酸甲酯(MMA)本体聚合动力学进行了研究。
- Complex 1 could catalyze the polymerization of methyl methacrylate and acrylonitrile. 配合物 1 能够催化甲基丙烯酸甲酯和丙烯腈的聚合。
- Poly(methyl methacrylate) branched chain in MG molecule structure was destroyed when thermal and oxygenous aging. MG分子结构上的显著变化是聚甲基丙烯酸甲酯支链破坏,热稳定性取决于接枝物结构及其热性能。
- This paper, introduces a new redox initiation system( BPO-DHPT) which makes methyl methacrylate resin cure effectively at room tempera-ture. 我们发现一种新的BPO-DHPT氧化-还原引发体系能很好地引发其室温聚合,研究了其引发机理。
- The pigment printing binder of textile for environmental protection was prepared by copolymerization with butyl acrylate, methyl methacrylate and styreneis as the main materials. 摘要以苯乙烯、甲基丙烯酸甲酯和丙烯酸丁酯为主要原料，经乳液聚合，制成了环保型的涂料印花粘合剂。
- From methyl methacrylate through performance monomers and molding compounds to sheet products, we also hold leading positions in the Americas. 从甲基丙烯酸甲酯到功能性单体、模塑化合物和板材产品,我们在美洲市场也占据了领先地位。
- A series of UV-cured AB crosslinked polymers (ABCP) based on vinyl-terminated polyethylene adipate polyurethane and methyl methacrylate were prepared. 用紫外光聚合方法制备出一系列端乙烯基聚己二酸乙二醇酯聚氨酯(PEAPU)和甲基丙烯酸甲酯(MMA)AB交联聚合物(ABCP)。
