您要查找的是不是:
- The Investigation of Fine Granuar of Primary Si Phases by Melt Temperature Treatment 熔体温度处理对初生Si相细粒化的研究
- Melt temperature treatment 熔体温度处理
- How is melt temperature controlled? 如何控制熔炼温度?
- The Microstructure of a cast nickel base superalloy M963 treated by high temperature treatment of melt was investigated and the room and high temperature tensile properties of the alloy were determined in the as cast and heat treated conditions. 研究了经 16 5 0℃高温熔体处理后的铸造镍基高温合金M96 3在铸态和热处理态的显微组织 ,测定了其室温和高温拉伸性能。
- The Effects of Temperature Treatment on Callus Induction of Capsicum Anuum L. 温度对辣椒花药愈伤组织形成的影响。
- Apart from raising the barrel temperature what other techniques can be used to raise the melt temperature? 除了提高料管温度外,还可以使用其他什么方法来提高融料温度?
- Too low melt temperature: Inhomogeneous melt with cold material inside (Which cause empty parts, broken parts etc. 熔体温度太低:材料塑化不均,熔体内含冷料(从而造成充模不足,冷料,产品断裂等)
- Its melt temperature is high and it has proper viscosity and low temperature flexibility. 具有较高的熔融温度,适宜的粘度和良好的低温柔韧性;
- Melt temperature should be a part of standard record-keeping, but because it changes very slowly it often gets ignored. 熔体温度应该成为常规记录中的一部分,但由于它变化比较慢,所以经常给忽略。
- HPLC is used to study the stability of insulin/cyclodextrin supramolecule with acid, base, high temperature treatment. 高效液相色谱法测定胰岛素/环糊精超分子在强酸,强碱,高温条件下的稳定性;
- The melt flow index of the blends was increased when the content of PEEK was decreased and melt temperature was increased. 结果表明:共混物的熔体流动指数随PEEK含量的降低和熔体温度的升高而增加;
- The series adjustment system that using melt temperature as main parameters was composed in HTM temperature control system. 在热媒温度控制系统中以熔体温度作为主参数,组成串极调节系统。
- The mold temperature obviously influences the molding process, while the melt temperature influences comparatively less. 模具温度对成型过程的影响较大,熔体温度的影响相对较小。
- A large amount of defect sites and metal impurities existed in CNF which could be effectively removed by high temperature treatment. 实验结果表明,化学气相沉积法合成的CNF含有较多金属杂质及表面缺陷位;
- The product is made of alkali glass fiber woven sleeve, via high temperature treatment,coated with organosilicon co-polymer resin. 该产品采用无碱玻璃纤维编织成套管,然后经高温处理,并涂有机硅共聚树脂而成。
- Improving the growing temperature and sputtering power is beneficial to the adhesion of AlN film in high temperature treatment. 适当提高衬底加热温度和溅射功率有利于改善AlN膜高温热处理时的附着性能。
- The effects ofdifferent temperature treatment on PAL ,PPO activity and the germination rateat different period of endodormancy were also different. 自然休眠的不同时期,不同的温度处理对PAL、PPO活性及萌芽率的影响效果亦不同。
- Through genetic algorithm, the injection molding parameters that affect thin-wall mould warpage,namely the mold temperature, melt temperature, filling pressure, packing pres... 按该参数进行试验,效果良好,可以有效地减小薄壳塑件翘曲变形,其试验数值与计算数值基本相符,说明所提出的方法是可行的。
- Influence of low temperature treatment with the 3rd instar larva on the larval duration and economic characters of silkworm,Bombyx mori L. 与相似的文献。