您要查找的是不是：
- Study on Controlled Cooling Process of the High Carbon Si Mn TRIP Steel 高碳硅锰系TRIP钢控制冷却热处理的研究
- Microstructural Evolution of a Low Carbon Mn Steel During Control Rolling at Different Temperatures 低碳钢控制轧制的温度范围及组织变化
- We don't make cutting tools from low carbon steel. 我们不用低碳钢制造切削刀具。
- The effect of stable magnetic field on grain refinement was investigated in the case of low carbon Mn Nb steel transformation from austenite to ferrite and pearlite. 研究了在低碳锰铌钢的奥氏体向铁素体和珠光体转变的过程中外加稳恒磁场的晶粒细化作用。
- For welding low carbon steel structres. 焊接低碳钢结构。
- Galvanized Low Carbon Steel Wire. 镀锌底碳钢丝。
- It is very clear that low carbon steel can be easily machined. 低碳钢容易加工是很清楚的。
- Application of RE Modified High Mn Steel in Wearproof Lining Plate. 稀土变质处理高锰钢工艺在耐磨衬板上的应用。
- The microstructure,resistivity and mechanical property of Al Si Mn Fe alloys are studied. 试验研究了Al?Si?Mn?Fe 合金的金相组织、电阻率和力学性能。
- Suitable for welding low carbon steel, low alloy steel structure. 适用于各种低碳钢、低合金钢构件的焊接。
- CFR uses low carbon, medium alloy steel as the matrix. CFR合金采用低碳、中合金钢成分为基体。
- Materials: high quality low carbon steel wire, PVC wire. 材料：优质低碳钢丝（镀锌、涂塑、喷塑）PVC丝。
- Electropulsing was employed to treat a low carbon microalloy steel. 研究了脉冲电流对一种低碳微合金钢的组织和力学性能的影响。
- Effect of Mn and Ti precipitates on the hot ductility of low carbon and ultra low carbon steels High Hardness Alumina Coating Prepared by Low Power Plasma Spray. 超低碳钢的高温强度节能、高效率等离子喷涂设备的开发。
- The effect of C and Mn contents on ferrite nucleation rate during Deformation-Enhanced Ferrite Transformation (DEFT) in low carbon (Mn) steels was investigated. 研究了碳、锰含量对低碳(锰)钢形变强化铁素体晶粒数目变化的影响.
- The fracture reasons of lining plate of microalloying high Mn steel have been analyzed. 对微合金化高锰钢衬板断裂原因进行了分析。
- The effect of adding RE in low carbon steel on carburized layer is studied. 研究了低碳钢中加入RE后对渗碳层的影响。
- The influences of Ce and P on embrittlement transition temperature in Mn steel has been investigated by impact test, SEM, TEM and Auger spectrometer. 利用冲击试验、扫描电镜、透射电镜、俄歇谱仪等方法，研究了铈和磷对含锰钢脆性转化温度的影响。
- Austenite and martensite are distinguished and textures in them are analyzed according to the orientation and misorientation distributions in the 15%Mn steel. 根据两相的取向及取向差分布分析了奥氏体与马氏体组织的织构特征;
- The corrosion weight loss rate and impact toughness of high Mn steel in hot concentrated caustic solution were studied by using immersed corrosion, impact test and SEM. 采用浸泡腐蚀试验和腐蚀前后的冲击试验并借助于扫描电镜观察,研究了热强碱介质中高锰钢的腐蚀速率和冲击韧度。
- 今日热词
-
- 深远海浮式风电平台 - deep-sea floating wind power platform
-
- 京雄高速公路 - Beijing-Xiongan expressway
-
- 农业及相关产业增加值 - the added value of agriculture and related industries
