您要查找的是不是：
- Little branch pipe vibration 小支管振动
- Make the nest among the branch Pipe. 在我稠密的树枝间筑巢、鸣叫。
- The inside of the branch pipe needs welding and grinding. 支管内部需补焊打磨。
- He cut the little branches on the trunk. 他把树干上的小分枝都剪掉。
- He cut those little branches of the trunk. 他把树干上的小分枝都剪掉。
- He cut the little branches in the tunk of the tree. 他把树干上的小分枝都剪掉。
- Solutions of Pipe Vibration of the Pump Station for Blast Furnace Circulation Water of Anyang Iron %26 Steel Group Co. 安钢高炉循环水泵站管道震动的处理方法。
- He cut off little branches from the bole. 他把树干上的小分枝都剪掉。
- He cut all the little branches of the bole. 他把树干上的小分枝都剪掉。
- When a pipe need to serve several equipments, or need to be led part flux, it is necessary to use branch pipe. 当一根钢管需要供应多台机组、或者需从钢管中引走一部分流量供其它用途时,便需要设置岔管。
- BRANCH PIPE VALVES. STOPCOCKS AND DRAW-OFF COCKS. GENERAL. NOMINAL PRESSURE PN 10. 支流阀.;关闭阀和给水阀
- Pour all the ingredint in a shaker, shake well then strain in a chilled glass.Garnish with a little branch of black or red berries on the rim. 将所有原料倒入摇壶;充分摇合后滤入冰过的杯子;杯口饰以黑莓或红莓.
- Developed excogitates of two decumbence and one hovizoutal molding die, realized increasing height of branch pipe of heat pressure tee and reducing radius of synodical arc of tee. 研制出两套立式模具和一套卧式模具,实现了用工艺方法增加热挤压三通支管高度,缩小三通相贯区内拐角处圆弧半径的目的。
- The diameter (opening position, outer painting) of this branch pipe is not correct. It must be fabricated in accordance with the drawing. 这一支管通径(开的位置,外部涂装)不对,一定要按照图纸施工。
- The UHMWPE tee joint was made by a kind of specific designed equipment in which the branch pipe and main pipe cut from UHMWPE pipe were welt into integer. 以UHMWPE管材为原料，在特殊设计的设备上，将支管和直管沿交接线熔接在一起，可制得各种规格的UHMWPE三通。
- He cut away the little branch. 他把树干上的小分枝都剪掉。
- Based on dynamic analysis,this paper analyses the reason of piping vibration caused by reciprocating compressor and bringst forward the method to inhibit piping vibration. 从动力分析角度,对往复式压缩机引起管道振动的原因进行分析,提出控制管道振动的方法。
- Piping vibration or damage caused due to dynamic loads, such as mechanical vibration, acoustic vibration, fluid hammer, pulsation and relief valve discharge. 由于动荷载引起的管道震动和损坏，例如机械震动，声波震动，液击，压力脉动和泄放阀门泄放时引起的震动。
- For branch pipe with few welding seam (e.g. blowdown, instrument component etc) numbering can be conducted as a integrity with its connected pipes. 遇到焊缝数量较少的支管（如排污，放空，仪表元件等支管）可以把该部分与其相连接的管道作为一个整体，进行编号。
- A spray bank is composed of multiple main headers, branch pipes and individual connection pipes for each spray nozzle. 淋水管排由多个主管路,支管以及连接各个喷嘴的独立的连接管组成。
