您要查找的是不是：
- Remove intake manifold, yoke retainer and aligning yokes. 拆下进气歧管、叉臂轭护圈，并对正叉臂轭。
- Direct gasoline injection and hydrogen intake manifold supply. 直喷式汽油和氢气进气歧管供应。
- When there is vacuum in the intake manifold, the vacuum holds the diaphragm up. 当进气歧管有真空存在时，真空便向上吸引膜片。
- The main difference is how they move air to the intake manifold of the engine. 这三种形式主要的不同在于它们把空气引入吸气导管的方式。
- Disconnect the exhaust pipe from the exhaust down manifold (refer to Group 11, Exhaust system and Intake Manifolds). 从排气下行管断开排气管（请参阅第11单元“排气系统和进气歧管”）。
- The pudding results from the failure of all the fuel to vaporize and from the sorting effect of the intake manifold. 积洼是全部燃料蒸发得不充分和进气歧管类似影响的结果。
- Some newer cars are also using polished intake manifolds to eliminate air resistance there. 一些新车使用抛光的多管道吸气管，来减少空气阻力。
- If the engine backfires, the sudden pressure in the intake manifold forces the valve back. 如果发动机回火，进气歧管骤增的压力就迫使阀门向后移动。
- Install the intake manifold (refer to Group 11, Exhaust System and Intake Manifold). 安装进气歧管（见单元11-排气系统和进气歧管）。
- Remove the intake manifold (refer to Group 11, Exhaust System and Intake Manifold). 拆下进气歧管（见单元11-排气系统和进气歧管）。
- On a typical in-line six-cylinder engine the carburetor is located on the intake manifold between cylinder 3 and 4. 在标准的六缸直列式发动机上，化油器被设置在进气歧管上3号和4号缸之间。
- This device, called the manifold heat-control valve, is built into the exhaust and intake manifold. 这种装置称为“歧管热控制阀”，它拼装在排气与进气歧管中。
- The piston moves up and down in the piston chamber primarily in response to changes in intake manifold vacuum. 活塞主要因进气歧管真空度的变化而在活塞腔内上下移动。
- When the engine is shut off, the intake manifold cools and a slight vacuum forms as a result. 这是因为当发动机熄火时，进气歧管冷却而产生轻微的真空。
- Fault Description(reason): High voltage detected at intake manifold pressure sensor signal pin. 故障描述（原因）：检测到进气歧管压力传感器信号电压值高。
- The intake manifolds for CF4G27 low set engine was designed in accordance with the principle of gas dynamics and CAD(Compu ter Aided Design). 运用气体动力学原理,结合计算机辅助设计(CAD)方法设计了CF4G27降高型发动机的进气歧管。
- Custom intake manifolds feed the two banks of four cylinders forcing the compressed and cooled air through the N15 Pulsar throttles. 自定义的进气歧管饲料的4缸迫使两家银行压缩和冷却通过N15的脉冲星节流空气。
- Intercooler installed in front of the radiator, intake manifold pipe joint moved to shorten path for intercooler hoses. Added oil flow to engine. 水箱前安装冷热气自动调节器,水管及入口改装,增加引擎喷油量。
- This paper introduces the calibration system and static and dynamic calibration method of an engine intake manifold pressure sensor. 介绍了发动机进气歧管压力传感器的标定系统和传感器静、动态标定方法。
- We dedicated to provide NVH solutions to our customer for engine cam cover fastening, intake manifold fastening and other Powertrain related systems. 我们致力于为客户提供发动机系统的NVH解决方案，包括发动机罩盖减震紧固单元，进气歧管减震紧固单元等等。
