您要查找的是不是：
- Incidence radiant flux density 入射辐射通量密度
- radiant flux density measurement 辐射通量密度测量
- radiant flux density 辐射通量密度
- Reflection radiant flux density 反射辐射通量密度
- The ratio of luminous flux at a specific wavelength to the radiant flux at the same wavelength. 发光效率一定波长的光量对同样波长的辐射光量的比例
- A unit of magnetic flux density equals to 1 maxwell per square centimeter. 一种磁通量密度单位，等于每平方厘米麦克斯韦。
- And the GSR flux density will increased in the last decade of 20 centuries. 20世纪后10年年平均总辐射通量密度有增大的趋势。
- Of a source of radiation. Ratio of the radiant flux (power) emitted to the power consumed. 辐射源发射的辐射通量(功率)与消耗功率之比。
- The results show that the ignition delay time is shortened along with the increase of the oxygen content, burning rate of HTPB propellant and the laser radiant flux. 研究结果表明：随着丁羟推进剂氧含量、燃速以及点火热通量的增加，推进剂的点火延迟时间缩短；
- Abstract: Powder core has high saturation flux density and excellent motion linearity of DC bias. 摘要：磁粉心具有较高的饱和磁通密度和较好的直流偏磁动态线性。
- The time-resolved neutron flux density measurement system on HT-7 Tokamak is presented in the paper. 本文介绍了HT 7超导托卡马克上的时间分辨中子注量率测量系统。
- In particular, approximate expressions for the air gap flux and the airgap flux density are derived. 特别是，近似表达式气隙磁通和气隙磁通密度的计算公式。
- The effect of the oxygen content, burning rates of HTPB propellants and the laser radiant flux on the ignition delay time was investigated experimentally with a CO2-laser ignition apparatus. 应用CO2激光点火器研究了丁羟推进剂中氧含量、燃速等因素及激光点火热通量与点火延迟时间之间的关系。
- Of a radiation. Description of the spectral character of a radiation by the relative spectral distribution of some radiometric quantity (radiant flux (power), radiant intensity, etc.). 对辐射而言。用某一辐射度量（辐射功率，辐射强度等）的相对光谱分布对一辐射的光谱特性进行的描述。
- Because of their high flux density and superior temperature stability, cast magnets have been accepted in the widest range of application. 由于它们的高通量密度和优越的温度稳定性，铸造磁体已被接受的范围最为广泛的应用。
- Some important TIR radiation laws have been revealed, such as the characteristics of IR thermography, the increment of IR temperature or radiant flux, the time-dependence features of IR temperature. 进而建立了热辐射参量（辐射温度、辐射通量、热像几何特征）与撞击参数（撞击速度、撞击能、撞击角度等）的关系模型；
- The results showed that shielded screen can regulate the magnetic flux density distribution to assure melt in ideal state in forming inductor. 结果表明:屏蔽罩能够调节成形感应圈内的磁场分布,使成形感应圈内的熔体处于合理状态;
- In summary, DMC and DMM can greatly reduce smoke emission and thermal radiant flux, which leads to higher thermal efficiency of diesel engine.So DMC and DMM are ideal oxygenate additives for diesel. 综上所述，DMC和DMM能有效降低碳烟的生成及排放，减少缸内辐射传热量，从而提高了发动机有效热效率，是较为理想的柴油添加剂。
- Selection of laser pulse shape, pulse duration, flux density are discussed in pulsed laser microwelding and the experimental results are given. 讨论了脉冲激光微型焊接中;对于激光的脉冲形状、激光脉冲宽度、激光通量密度等的选择;并给出了实验结果.
- The effects of contact angle, heat flux density, operating temperature and groove geometry on radial dryout point were discussed. 讨论了接触角、加热热流密度、运行温度、槽道几何对干点位置的影响。
