您要查找的是不是:
- hydrogen pressure regulating curve 氢压力调整曲线
- Hydrogen Pressure Regulator 氢压调节器
- Closing time for pressure regulator. 调压阀出水口从全开到全关所需要的时间。
- The pulley width and speed control is handled by a high/low pressure regulator. 滑轮的宽度和速度控制是通过高/低压力调整器来控制。
- A precision pressure regulator maintains the carrier-gas pressure constant. 精密压力调节器可以维持载汽压力恒定。
- The relation between hydrogen pressure and electrode potential conforms to Nernst equation. 氢气压力与电位的关系符合能斯特方程;
- An experimental system of pressure regulator characteristic is introduced. 介绍了研究减压器特性的实验系统。
- Through exoterica analyse or test validate in practice, worker can use fire to polish outside hydrogen pressure vessel. 通过理论分析或实际测试验证,在氢气压力容器的罐体外部可以进行动火打磨工作。
- The same trend happened to the hydrogen pressure,and isotacticity reached maximum whe. 随着氢气压力的增大,聚丁烯-1的等规度先增大后减小,当氢气压力为0。
- Hydrofining is a process of various oil products upgrading under hydrogen pressure. 加氢精制是各种油品在氢压下进行催化改质的统称。
- The coprocessing reaction between catalytic cracking resid (CCR) and coal is carried out in 1L autoclave under hydrogen pressure of 7.0 Mpa. 用1L高压反应釜通过煤与催化裂化油浆共处理制得了沥青并对沥青性质进行了分析研究。
- With the raising of partial hydrogen pressure, the cracking reaction of tert-butylbenzene is prompted, while the conversion of butylbenzene is restricted. 叔丁基苯的转化率随氢分压的升高而提高,正丁基苯的转化率随氢分压的升高而降低。
- A miniature plastic water pressure regulator shall be installed where indicated on the plans. 在计划指示的地方应该安装微型塑料水压力调节阀。
- The Watts Feed Water Pressure Regulator must be installed on the cold water supply line to the boiler. 美国瓦茨进水压力调节阀必须安装在通往锅炉的冷水供应管道上。
- In such discharges, the plasma density was determined entirely by the outgassing of the limiter and wall, and independent of the initial hydrogen pressure p0 totally. 在这类放电中,等离子体的密度由限制器和壁的出气量决定,而和初始充的氢气压强完全无关。
- In such discharges, the plasma density was determined entirely by the outgassing of the limiter and-wall, and independent of the initial hydrogen pressure pA totally. 在这类放电中,等离子体的密度由限制器和壁的出气量决定,而和初始充的氢气压强完全无关。
- The valve shall contain a Watts Regulator Model 9D backflow preventer and Model 1156 feed water pressure regulator. 这种阀门包含美国瓦茨调节阀型号9D防倒流阀和型号1156进水压力调节阀。
- The hydrogen pressure transient in the break point and the compressibility of water/steam in the tubes are taken into account in the water leakage rate model. 根据断裂处氢气压力变化,并考虑管内流体的压缩性建立了水的泄漏率模型。
- The whole test cycle is automatedis pneumatically controlled by pressure regulator valves. 使用专用夹具,确保可以测量不同直径和高度的罐。
- While hydrogen pressure reduces beyond a certain limit, the pulse missing named pulse to pulse quenching will occur and operation will be very instable. 当氢压减小超过一定限度,脉冲漏失现象出现,这种脉间猝熄很不稳定。