您要查找的是不是：
- The results show that material has large pressure gradient and velocity at the screw edge region. In intermeshing region, material has high temperature and cooling step shall be put in practice. 计算结果表明 :在螺棱处 ,物料的压力梯度和速度较大 ,在啮合区的温度较高 ,应当采取适当的降温措施 ;
- He had a high temperature and a sore throat. 他发着高烧，喉咙也痛。
- The Numerial Simulation of Two-Phase Efflux with High Temperature and Velocity in the Passage of Cooling Fibre 纤维冷却场内高温高速气粒两相射流的数值模拟
- Suit to: conditions of high temperature and minor diameter. 适用于温度较高的工况及直径很小的密封部件。
- Cagayan Nutmeg favors high temperature and wet environment. 兰屿肉豆蔲性喜高温多溼环境。
- High Temperature and Velocity 高温和高速
- First, it had made academic analysis about temperature and velocity fields inside the fire cistern. 本文从射流理论出发,探索利用消防水池进行蓄冷空调的可能性问题。
- Your engine will consume some oil due to high temperatures and engine wear. 由于高温和引擎磨损会使引擎消耗一些油料,所以定期检查是非常重要的。
- The software used to simulate temperature and velocity fields in laser surface remelting process is developed on the basis of PHOENICS code. 在PHOENICS软件基础上开发了模拟激光表面重熔过程温度场和速度场的数值程序;
- A mobile, high temperature and tasteless, non-fast guitar phenomenon. 有流动性、无味耐高温、无结快现象。
- At quasi-state stage, the depth and rad ius of laser pool have small changes, but the highest surface temperature and velocity of molten pool decease rapidly. 在凝固准稳态阶段，熔池熔深和半径变化较小，但表面最高温度、熔池流速急剧减小；凝固加速阶段则反之。
- Select the system of copolymerisation,the optimum reactive conditions of temperature and velocity,and the best quantity of emolsifier and initiator of acrylate emulsion thickener. 选择丙烯酸酯乳液增稠剂共聚反应的方式、反应温度、滴加速度等最佳反应条件及乳化剂、引发剂的最佳用量。
- Consequently, a new delimitating standard of grid in normal direction is proposed here synthesizing distribution of temperature and velocity boundary layers. 因此，在高马赫数情况下，特别是想利用温度场计算热流时，不能只考虑用速度边界层的厚度来确定法向网格尺寸，必须综合温度边界层与速度边界层的分布特征来确定法向网格尺寸。
- The characteristic equations for temperature and velocity of air flow in jet main region specification model were put forward and validated in a case study. 提出主流区风口模型计算气流温度和速度的特性公式,并研究其在工程中的实际应用情况。
- By increasing the length of Laval nozzle, an approach was presented to obtain higher particle velocity necessary for gas-solid separation in dusty gas of high temperature and high pressure. 提出了用增加缩放喷管长度的方法，使含尘高温高压气体中的灰尘颗粒获得实现气固两相分离所必需的更高动量的途迳。
- These materials are found capable of withstanding high temperature and high pressure . 发现这些材料能承受高温高压。
- In wet combustion the sludge is processed at high temperature and under pressure. 污泥的湿烧是在高温和压力下进行的。
- Construction of high temperature and long life internal combustion hot blast stove at Anshan Iron and Steel Co. 鞍钢高风温长寿命内燃式热风炉的建设。
- TCS one|step process was employed to produce 57 dtex/36f super bright triangle PET FDY. The effects of drying step, spinning temperature and velocity, quenching conditions, and thermal channel temperature on fiber quality were discussed. 用热管纺丝拉伸一步法 ( TCS)生产 5 7dtex/36f涤纶超有光三角形 F DY ,探讨切片干燥、纺丝温度、速度、冷却条件、热管温度等对产品质量的影响。
- Research and Application of High Temperature and Quick Rolling Technology in Shaoguan Iron and Steel Co. 韶钢热送热装高温快轧新工艺的研究与应用。
- 今日热词
-
- 深远海浮式风电平台 - deep-sea floating wind power platform
-
- 京雄高速公路 - Beijing-Xiongan expressway
-
- 农业及相关产业增加值 - the added value of agriculture and related industries
