您要查找的是不是：
- Heat releasing ratio 燃烧放热率
- Please do not plug equipment heat release system. 请不要堵塞设备的散热系统。
- With the increasing of NIPAm content, the salicylic acid loading ratio of P(NIPAm-co-AAm) andPAAc/P(NIPAm-co-AAm) inceased, and releasing ratio deceased. 随NIPAm含量的增大,P(NIPAm-co-AAm)凝胶对水杨酸钠的载药率增大,释药率增大;
- Micro-modeling can not only predict the solidified microstructure of materials but also provide accurate information on latent heat releasing for macro-modeling. 微观模拟不仅可以得到材料的凝固组织,而且还能为宏观模拟提供准确的潜热释放信息。
- The result of pot experiment displayed that the releasing ratio of the new fixed NH + 4 of overburden layer and loess parent material horizon in Lou soil was 98.32% and 95.09% respectively. 盆栽试验结果表明 :土娄土覆盖层和黄土母质层中“新”固定态铵的释放率分别为 98.;32%25和 95
- Heat released by the oxidation keeps the metal molten. 氧化过程中释放出来热量还能保持金属熔化。
- In equipment operation, not plug equipment heat release part. 在设备运转时,请勿堵塞设备的散热部位。
- The reaction to get Hexafluoropropene through decomposing Tetrafluoroethylene is complicated because the products have many kinds.There are a great quantity of heat releasing from the reaction. 而四氟乙烯的热分解制备六氟丙烯的反应比较复杂，组成多，反应过程中伴有大量热量放出，且有自聚结碳现象，温度、流量等工艺参数稍微控制不好，即引起反应器的堵塞，甚至烧穿热解管。
- There is also an enormous amount of heat released in the exhaust gasses! 而且在尾气里也会释放出巨大的热量。
- L-1) and release ratio (75%) were 2 and 6.8 times,respectively, higher than that of control cells , with 4 mL EFCB added to cultures on day 5 of cultivation. L-1与75%25; 分别是对照的2倍与6.;8倍。
- Disturbances in the recirculating flow regime can produce related variations in the heat release rate in the primary mixing region. 回流区域内的扰动可使主要混合区内热量释放发生相应的变化。
- The heat released from chemical reactions in its interior has no significance for the heat balance of the earth. 地球内部化学反应释放的热对于地球的热平衡并不重要。
- Weight light, reduce weight effectively; absorb capacity, reduced vibration, heat release easy and high safety. 比重轻、有效降重;吸能减震易散热、安全性高。
- In an adiabatic system, this heat release serves to increase the chamber temperature. 在一绝热系统中，放出的热量增加了燃烧室的温度。
- The Effect of Latent Heat Release on the Evolution of a Warm Occluded Thermal Structure. 潜热释放对热固囚热结构的作用。
- The selectivity behavior becomes coupled with the heat release hehavior for this particular reaction. 对这个具体反应来说，选择特性和放热特性关联起来了。
- The results show that vorticity advection, thermal advection and latent heat release made great contribution to the development of the depression. 中低层的温度平流、降水凝结释放潜热维持上升运动，是低压进一步发展的有利条件。
- The heat release graphs of platelets cryopreserved with or without 5% DMSO were also measured by differential scanning calorimeter(DSC). 同时利用差式扫描量热计 (dsc)记录加和不加 5 %25DMSO的血小板在降温过程中的放热峰。
- The key factors to produce post molten region are the overheating and the lat ent heat released during solidification process in upper molten pool. 影响后熔的主要因素是熔覆层和过渡区凝固过程中释放的潜热和熔覆层的过热。
- Heat sometimes causes a prickly rash on the skin. 热有时使皮肤上生剌痛的疹子。
