您要查找的是不是：
- Fused deposition modeling (FDM), a representative rapid prototyping technology with no use of toxic materials, has been widely used in offices. 摘要熔融堆积成型(FDM)是一种典型的快速成型技术，由于无污染适合办公环境下使用而得到广泛应用。
- The requirement for the property of molding and support materials for Fused Deposition Modeling (FDM) are analyzed. 摘要对熔融沉积(FDM)成型材料、支撑材料的性能要求进行了分析；
- Scan methods of Fused Deposition Modeling(FDM)were analyzed and arithmetic of zoning was put forward. 分析了熔融沉积(FDM)快速成形工艺的扫描方式,建立了分区域穿梭扫描算法。
- The Fused Deposition Modeling (FDM) device has many advantages, such as high accuracy. 熔丝沉积快速成形(FDM)方法是快速成形技术中的一个重要分支。
- By using the technology of "element birth and death" in the software of ANSYS, this paper describes the process of Fused Deposition Modeling. 摘要利用ANSYS有限元软件中的“单元生死”技术，对熔融挤压快速成型的成型过程进行模拟。
- Factors which produce errors in fused deposition modeling (FDM) may include principles, equipment, process and contraction of ABS materials. 快速成型制件产生误差的因素有原理性误差、设备误差、工艺误差及材料收缩引起的误差。
- The shaped errors have many forms, including warpage deformation, Stair-stepping effect and so on in fused deposition modeling (FDM). 在熔融堆积成形制造中，形状误差有翘曲变形、台阶效应等形式。
- Abstract With the piston action of unmelted wire , for some Fused Deposition Modeling (FDM) the melted polymer is extruded by the driving force from feeding polymer wire. 摘要 借助未熔丝材的活塞作用，部分熔融沉积造型 (FDM )技术靠料丝插入的驱动力将熔融材料挤出。
- In this paper,the principle of FDM(fused deposition modeling )is brifed,then the factors which influence the precision in maching process was presented in detail. 介绍快速成形技术中的熔融沉积成形的基本原理,分析了在成形过程中,各种因素对精度的影响,并在此基础上,提出了提高成形件精度和表面质量的措施,对熔融沉积工艺有应用价值。
- The Fused Deposition Modeling (FDM) device has no laser, so the equipment is cheaper, plus its high efficiency and high accuracy, it is significant to research. 熔丝沉积(FDM)快速成型设备不使用激光器,因此其运行成本低,且其加工效率高,制件的强度大,因此,研究和开发国产化的熔丝沉积快速成型设备具有重要的意义。
- Among the alternatives are fused deposition modeling and so-called 3-D printers, which can crank out pieces quickly and inexpensively, although they may be a bit less accurate and long-lasting. 同类技术还包括熔融沉积成形以及3D印表机，3D列印技术可快速制作模型，成本不高，不过往往不够精确也不够耐用。
- The Application of Fused Deposition Modeling to the Plaster Precision Casting 融积成型技术在石膏型精密铸造上的应用
- Research on the Thermal Model and Process Control for Fused Deposition Modeling 熔融沉积制造的热学模型和工艺控制研究
- Analysis on the Extrusion Rate Control of Molten Polymer in Fused Deposition Modeling 熔融沉积成型聚合物熔体挤出速度控制
- fused deposition modeling 熔融沉积成型
- fused deposition modeling(FDM) 熔融挤压快速成型
- Fused Deposition Modeling (FDM) 熔融沉积
- Fused deposition modelling 融熔沉积
- Through a case study and some practice prosthetic sockets fabrication, it is feasible that used air-pressure fused deposition machine to fabricate prosthetic socket. 通过接受腔的实际制作以及临床应用试验，验证了采用气压式熔融沉积快速成型机制造假肢接受腔的可行性。
- Based on the regional acid deposition model(RADM), a high resolution model(EM3) for species exchange within the troposphere (TL) is designed. 在区域酸沉积模式(RADM)基础上,设计了一个高分辨对流层(tl)物质交换模式(EM3)。
