您要查找的是不是：
- Progress of Fuel Assembly Design and Test for China Advanced Research Reactor 中国先进研究堆燃料组件设计及试验进展
- Fuel assembly design 组件设计
- Results show that design of the dismountable fuel assembly and the hot cell examination facility is reasonable, remote operation is practical inside hot cell. 主要结果是:可拆卸组件及相应热室检验装置的设计合理,热室内远距离操作可行;
- TPFAP is a transmisssion probabilily fuel assembly code package for burnup calculations on BWR and PWR. TPFAP是一个同时适用于PWR和BWR的穿透几率法燃料组件燃耗计算程序包。
- Early studies analyzed using the WIMSSN system had large errors in fuel assembly analyses with burnable poison (BP). 用WIMS-SN系统计算含可燃毒物组件时,出现比较大的误差,不适宜低温供热堆含可燃毒物组件的计算。
- On the other hand,the damp of fuel assembly in water increases greatly and restrains the aseismatic response greatly. 板状燃料组件在环境中的振动阻尼大,能大大抑制抗震响应。
- DF-DMC has used 3D-solid design, assembly design, explosive-assembly design, parameterized design and achieved the integration of CAD/CAM on C/F. 模具公司在开发此项技术中采用了三维实体设计技术、装配设计技术、参数化设计技术和总成爆炸图设计技术，实现了检具CAD/CAM的一体化。
- There exists probability of fuel assembly damage in PWR during refueling period. 在压水堆核电站换料的过程中存在燃料棒破损的可能。
- Based on practical usage, this paper describes the working principle of float paving which must be observed in assembly design. 摘要本文从实际应用出发，阐述了在摊铺机总体设计中应遵循的浮动摊铺工作原理及针对摊铺机的工作特点而研究的一些设计理论。
- The model of calculating the flux distribution in the 2-D hexagonal fuel assembly of LWR by transmission probability method is described. 介绍利用穿透概率法求解二维六角形轻水堆燃料组件中子通量密度分布。
- The reactor core is composed of 205 AFA-3GXL fuel assemblies. 反应堆堆芯由205个AFA-3GXL燃料组件组成；
- Independent assembly design is used for the upper and bottom corrugating rolls for easy assembly and unassembly and replacing. 成套拆装，便于快捷更换;
- When a fuel assembly comes out, highly radioactive fission products such as strontium 90 and cesium 137 are generating tens of kilowatts of heat. 当一块燃料组件取出时，诸如锶90和铯137这样的高强辐射产品将放出数万瓦的热量。
- The development and applying of CIMS(Computer Integrated Manufacture System) and CE(Concurrent Engineering) are giving assembly design a more highly requirement. 计算机集成制造系统CIMS和并行工程CE技术的发展和应用，对装配设计提出了更高的要求。
- Abstract This paper proposes a multi-layer design of fuel assemblies for the fast zone of the SCWR (supercritical water reactor) mixed core. 摘要 提出超临界水混合堆快谱区多层燃料组件设计方案。
- G Boothroyd and P. Dewhurst of University of Massachusetts firstly gave this terminology when they applied a method to evaluate the performance of product assembly design. DFA这一术语，最早是由美国马萨诸塞大学(University of Massachusetts)的G Boothroyd和P.
- Abstract： A set of software package possessing engineering practical value to calculate PWR hexagonal fuel assembly homogenous parameters has been developed in this paper. 摘 要： 介绍了所研制的具有工程实用价值的压水堆六角形燃料组件均匀化计算软件包。
- The collaboration related issues, such as asynchronous collaborative design, synchronous collaborative design and collaborative assembly design, are analyzed. 在协同技术方面，集中分析了异步协同设计、同步协同设计和协同装配设计；
- Free floating ball and chain assembly designed to stop damage by livestock. 自由浮动浮球和链式装置,用于防止家畜的破坏。
- The system included five modules which were the finite element analysis of workpiece,virtual assembly design of Tooling, kinematic simulation and project management. 该系统包括工序件的有限元分析、端拾器的虚拟装配设计、运动仿真、系统维护和项目管理等模块。
