您要查找的是不是:
- Flow model in porous medium 渗流模型
- The possible future advances in contaminant modeling in porous media are pointed out. 最后展望了污染物迁移模拟今后可能的发展方向。
- An exhaust flow model of DPF, based on the terms of porous medium, is requisite to display the influences on flow induced by filter"s configuration. 再讨论多孔介质条件的基础上建立了微粒捕集器排气流动模型,并分析了捕集器结构参数对流动分布的影响。
- Thermal plumes in pure fluids and in porous media. 纯流体与多孔体内的热柱流;
- Porous Medium Leakage Flow Model of Brush Seal 刷式密封中泄漏流动的多孔介质数值模型
- The complexity of structure in porous medium results in too complex inner flow to get analytic solution without simplifying. 多孔介质结构的复杂性使其内部的流动非常复杂,通常不加简化就难以求解。
- An equivalent numerical simulation model that can describe the foam flowing rules in porous medium is constructed based on ultimate capillary pressure. 建立了一个基于临界毛管压力并能够描述多孔介质中泡沫流动规律的等效数学模型。
- The Biot-flow and Squirt-flow mechanisms are two important mechanisms of fluid flow in porous media with fluid. Dvorkin and Nur presented an unified BISQ(Biot-Squirt)model,but it is complex in fluid-pressure equation. Maradou S.D and Erwin A. Biot流动和喷射流动是含流体多孔隙介质中流体流动的二种重要力学机制,Dvorkin和Nur提出了同时包含Biot流动和喷射流动力学机制的统一的BISQ(Biot-Squirt)模型。
- Ikoku C U,Ramey HJ Jr.Transient flow of non-Newtonian power-law fluids in porous media[Z].SPE7139. 栾志安;林平一.;天然裂缝地层中非牛顿液体不稳定径向流的研究[J]
- We always adopt uniform fluid , separate fluid and drift flow model in multi-phase theory. 多相流理论中经常采用的有均流模型、分流模型及漂流模型。
- We consider an infinite horizontal incompressible Rivlin-Ericksen layer in porous medium. 考虑一不可压缩位于多孔介质中的Rivlin-Ericksen流体层。
- When gas percolates at a low speed in porous medium with low permeability, slippage effect will occur. 低渗透气藏普遍具有低孔、低渗、高含水饱和度的特点,气体渗流存在明显的滑脱效应。
- The open-boundary Cellular Automata traffic flow model in accordance withthe practice was raised and simulated numerically on the basis of BML model. 在BMI模型的基础上,提出了符合实际情况的开放边界交通流模型并对其进行了数值模拟分析。
- Compressible miscible displacement in porous medium is modeled by a nonlinear system of two coupled partial differential equations. 在油藏数值模拟中,多孔介质可压缩可混溶驱动问题的数学模型是由两个非线性抛物方程耦合而成。
- Ikoku C U,Ramey HJ Jr.Wellbore storage and skin effects during the transient flow of non-Newtonian power-law fluids in porous media[Z].SPE7449. 向开理;涂晓青.;分形复合油藏非牛顿幂律流体不稳定渗流的数学模型[J]
- Amba S A,Chilingar G V,Beeson C M,et al.Application of electrical current for increasing flow rate of oil and water in porous media. 王玉斗;关继腾;王殿生.;直流电场提高水驱油效率的数值模拟方法
- A general code, three-dimensional cylindrical coordinates with collocated grid system for heat transfer and fluid flow in porous media, is developed. 在三维圆柱坐标程序基础上开发了计算多孔介质流动与换热的三维交错网格程序。
- Aim To analyze the expressive power and suitability of Xinpai-driven model for control flow modeling in workflow in depth. 目的评估信牌驱动模型在工作流过程控制流建模方面的表达能力和适用性。
- In order to study the occurring and developing mechanism of viscous fingering in porous media,computer emulational model of porous media is established based on stochastic theory. 为了研究多孔介质中粘性指进现象的发生和发展机理,基于随机理论建立了多孔介质计算机仿真模型。
- In order to probe into laws on formation of natural gas hydrates in porous medium,natural gas hydrates have been formed through mixtures of ice powers and quartzes in experiments. 为了探讨多孔介质中天然气水合物原位形成规律性,进行了将冰粉和石英砂混合并形成天然气水合物的实验研究。