您要查找的是不是:
- Fibre Porous Ceramic Matrix 纤维多孔陶瓷基体
- Ceramic whisker reinforced ceramic matrix composites. 将陶瓷晶须弥散在陶瓷基体内,起增强改善材料性能的复合材料。
- Porous ceramic perform is the important component of composites with interpenetrating networks. 介绍了网络陶瓷预制体的制备方法及研究进展,分析了各种制备方法的特点。
- A filter medium consisting of porous ceramic pipes suitable for use in freshwater and saltwater aquariums. 是一种超高密度多孔滤材,适用于淡、海水水族。
- The laminate model of porous ceramic membranes proposed by Dong Junhang et al was modified. 对董军航等人提出的多孔陶瓷膜层状结构模型进行了改进。
- mullite fibre ceramic matrix composite 莫来石纤维陶瓷基复合材料
- Porous ceramic materials on the base of strontium zirconate were developed with zirconium dioxide,baddeleyite powder,and granular polysterol. 采用二氧化锆、斜锆矿粉、碳酸锶及粒状聚苯乙烯制成了锆酸锶多孔陶瓷材料。
- A crucial device of the equipment is infrared flame burner,which is a porous ceramic burner made of infrared radiation naterials that are mixed. 该设备的关键器件为红外火焰燃烧器,它是由红外辐射材料经混合、压挤、焙烧而自然形成的多孔陶瓷燃烧器。
- The application of porous ceramic in the fields of catalyst support, filters and thermal insulation materials are reviewed. 摘要介绍了多孔陶瓷在催化剂载体、过滤器、隔热和耐热材料等方面的应用;
- An idea of gas pyrogenation purification and porous ceramic causing heat by electricity adsorption purification is put forward. 本文从新的角度来解决矿井瓦斯爆炸问题,提出了煤矿瓦斯气体热分解净化和多孔电致发热陶瓷吸附净化的思路。
- The research status quo in continuous fiber reinforced ceramic matrix composite(FRCMC) at home and abroad is reviewed. 从基体和纤维的选择、增韧机理、制备工艺等方面综述了国内外连续纤维增强陶瓷基复合材料(FRC-MC)的研究现状。
- Reticulated porous ceramic was a new non-mental material, which had 70%-95% open porosity and three-dimension solid netlike framework. 网眼多孔陶瓷是一种孔隙率高达70%25-95%25,具有三维立体网格骨架结构和贯通气孔的新型非金属多孔材料。
- Porous ceramic with different pore sizes and porosity up to 62.8% were prepared by conventional mechanical foaming method combined with gelcasting using water-soluble polymers. 将传统的机械起泡工艺与水基凝胶注模成型工艺相结合;制备出了不同孔径、孔隙率高达62.;8%25的多孔陶瓷。
- In order to investigate the superplasticity of ceramic matrix laminated composite, the superplastic deep-drawing process was simulated by FEM. 为研究陶瓷基层状复合材料的超塑性能,对其超塑拉深成形过程进行了有限元模拟。
- Through the primary exploring, lightweight porous ceramic was prepared whose porosity, compressive strength, and buck density is 57.34%, 5.34MPa and 0.9 g/cm3, respectively. 经中试初步探索制备了气孔率达57.;34%25、体积密度在0
- For example, there is a mullite in stainless steel-SiC ceramic matrix composites, a WC in W-SiC composites, a TiC in Ti-SiC composites and an Al74Si6Mn20 in Mn-SiC composites. 添加不锈钢、W、Ti和Mn的复合材料中分别对应有莫来石相、高温碳化钨相、高温碳化钛相和低熔点Al_(74)Si_6Mn_(20)相生成。
- Effect of correlation between interfacial bonding and ductile phase geometry on toughening in ductile phase toughened ceramic matrix composites has been discussed. 论述了相界面结合与延性相的几何形态之间的匹配关系对延性相增韧的陶瓷基复合材料韧性的影响。
- The paper discussed that Silicon-nitride based porous ceramic was prepared by reaction-sintering and pressless-sintering with the powder of Si as raw material, Al2O3 and Y2O3 as sintering aids, carbon and carbamide as pore-forming agent. 本课题以Si粉为原料,以Al_2O_3、Y_2O_3、Al_2O_3+Y_2O_3等为烧结助剂,以C粉、尿素和碳酸氨为造孔剂,采用反应和常压烧结,同时结合造孔剂法制备氮化硅基多孔陶瓷。
- electro-heating porous silicon carbide ceramic matrix 电致发热多孔碳化硅陶瓷基体
- A kind of artifical bone which was a composite of CeO_2 stabilified tetragonal phase zirconia porous ceramic within H-Z coating and bone morphogenetic protein(BMP) of pig was studied in this paper. 研究H-Z涂层内以CeO2稳定的四方相氧化锆多孔陶瓷,与猪骨形态发生蛋白复合而成的人工骨。