您要查找的是不是:
- FRONT STEERING KNUCKLE 前转向关节
- Remove the steering knuckle from the strut. 自支柱拆除转向关节。
- This movement is produced by gearing and linkage between the steering wheel in front of the driver and the steering knuckle (or wheel). 这一运动是由装在驾驶员前面的转向盘与转向节(车轮)之间的转向器和连杆装置来共同完成的。
- Route sensor wire from steering knuckle to fender panel. 从转向节到防护板安排感知器导线走向。
- It consists of steering wheel, steering shaft, worm, gear sector, pitman arm drag link, steering knuckle arm, king pin, steering arms, tie rod, front axle and steering knuckle. 转向系统包括转向盘、转向轴、蜗杆、扇形齿轮、转向摇臂、直拉杆、转向节臂、主销、转向臂、转向直拉杆、前轴和转向节。
- Con-rod for ship building, high pressure forged block for petrolium, front axle, steering knuckle, crankshaft and core shaft for automobile, turbine blade for energy industry. 船舶类:船用柴油机连杆系列石油类:高压锻钢阀体1、2、3、4寸系列汽车类:前轴、转向节、曲轴、芯轴系列能源类:叶片
- Wheel shaft, wheel rim, gear, gear ring, con-rod, crankshaft, steering knuckle, steering arm, cam flange, spindle etc. 轮轴、轮毂、齿轮、齿圈、连杆、曲轴、转向节、转向节臂、垂臂;突缘、十字轴等异形件;轴类零件等锻件及主、被动齿轮成品。
- Based on the analyses, the forging process for a steering knuckle has been designed. 在此基础上,进行转向节锻造设计。
- The results show that the thermomechanical treatment can improve the quality of the automobile steering knuckle. 结果表明,锻造余热淬火工艺对汽车转向节质量有明显改善。
- The hub and bearing assembly does not require removal from the steering knuckle to replace wheel attaching studs in the hub and bearing assembly. 更换轮毂及轴承组件内的车轮固定螺桩无需自转向关节中取出轮毂及轴承组件。
- A compound controller was proposed to improve braking lateral-stability by integrated control of direct yaw-moment control and active front steer. 结合直接横摆力矩控制和主动前轮转向控制;设计了一种提高制动方向稳定性的复合控制系统.
- "The steering knuckle then supported through Ball joints, by upper and lower control arms which are attached to the car frame. 转向节通过球头节与安装在车架上的上下控制臂相连。
- A control system was proposed to improve braking distance and stability by the integrated control of yaw-moment control and active front steering. 提出一种结合横摆力矩控制和主动前轮转向控制的提高紧急制动侧偏稳定性的控制方法.
- Macro and micro structure of the fractured steering knuckle arm was examined by optical microscope and scanning electron microscope. 采用光学显微镜和扫描电镜对断裂转向节臂的宏、微观组织进行了分析。
- A steering knuckle is the key component in cars, which needs high requirements in dimensional accuracy and product quality. 摘要轿车转向节是轿车上的关键零件,对尺寸精度和产品质量要求很高。
- The effect of thermomechanical treatment on the microstructure and properties of the automobile steering knuckle was researched in this paper. 研究了汽车转向节锻后余热淬火工艺对钢的组织和性能的影响。
- The forming process of 6400 steering knuckle arms was analyzed by plastic FEM software Deform. The reasons causing the problems of fold and underfill in the production were found. 使用塑性有限元分析软件deform对 640 0转向节臂成形过程进行了模拟分析 ,找出了其在生产过程中出现的折叠、缺肉等问题的原因。
- During steering maneuvers, the strut and the steering knuckle (through the ball joint and a pivot bearing in the strut's upper retainer) turn as an assembly. 车辆转向时,支柱以及转向关节(经由球形接头与上支柱固定器之轮毂轴承)会一体旋转。
- On single-ended output's gear rack type diverter, a rack's end with changes the steering knuckle tie rod through the inside and outside bracket to be connected. 在单端输出的齿轮齿条式转向器上,齿条的一端通过内外托架与转向横拉杆相连。
- Many types of steering linkage have been made to connect between the steering knuckles of the front wheels and the pitman arm of the steering gear. 很多类型的转向连杆装置都是用来连接前轮转向节和转向器的转向摇臂的。