您要查找的是不是：
- The deformation of cone-box shaped part in hydromechanical deep drawing is simulated by the FEM software ANSYS. 摘要利用大型有限元分析软件ANSYS对锥盒形件充液拉深的成形过程进行了数值模拟。
- Vibrations of an excited U-shape pipe and its radiation field are investigated by using FEM software ANSYS and acoustic BEM code SYSNOISE. 摘要利用有限元软件ANSYS和声学边界元软件SYSNOISE对U型管道结构的受激振动与辐射声场进行分析。
- A simulation study was made of the centrifugal stresses exerted on a grinding wheel by means of a visual numerical simulation technique,using the FEM software ANSYS. 应用可视化数值模拟方法,借助于大型通用有限元软件ANSYS建立砂轮回转的数学模型,对离心应力进行了仿真研究。
- A jacket type offshore platform CII located in Bohai Bay was modeled as a steel frame structure and the FEM software ANSYS was applied to study dynamic characteristics of the structure. 将位于渤海湾的CII导管架海洋平台看作空间钢架结构,应用ANSYS软件对导管架平台进行动力学分析,得到平台的基本动力学参数;
- The paper analyses the cooling process of symmetrical and dissymmetrical section profile with FEM software ANSYS, then adopt the data to guide the design of mould"s cooling system. 使用有限元分析软件ANSYS分析了对称截面和不对称截面两种型材在定型模内冷却的过程,并采用分析得出的数据指导定型模冷却系统的设计。
- FEM software ANSYS 有限元分析软件ANSYS
- Based on the Finite Element Method (FEM), the FE analysis software ANSYS was used to build the FE model. 基于有限元,借助于有限元分析软件ANSYS,建立了柱状微电机的有限元模型。
- Based on the substructure technique of FEM, the model of the fin heat exchanger using the commercial software ANSYS is analyzed. 摘要简述了有限元中的子结构技术，并应用ANSYS软件中的多重子结构方法对翅片式换热器进行模态分析。
- This paper uses FEM software package ANSYS to numerical imitate the elastic and plastic deform and plasticity unsteadiness phenomenon of detonator in pressure. 文中采用有限元结构分析软件包ANSYS,对某型雷管的压药进程中壳体的弹塑性大变形力学行为、塑性失稳现象的研究方法进行了数值仿真计算。
- Using FEM software of ANSYS to calculate vertical and horizontal bending beam, referencing the theoretical value, the appropriate subdivision number about beam... 结合算例分析了考虑纵横弯曲时,剪力和约束条件对内力和变形的影响;
- This paper is researching and analyzing drilling stem (<100 meter) in engineering by modeling test on TH50C-T drilling machine and software ANSYS on FEM of CAE technology. 本文以100m以内工程钻进的钻杆柱为研究对象,以TH50C-T钻机为实验平台,利用建模试验与CAE有限元仿真软件ANSYS进行分析。
- Based on the process of electric field analysis and optimum design,the shape of the conformal anode used in electrodeposition is designed by the use of the FEM software,ANSYS. 利用ANSYS有限元软件,通过电场分析和优化设计,对电沉积技术中所用的象形阳极进行了形状设计。
- Based on FEM analysis software ANSYS, a cylindrical latticed dome of an aerodrome is analyzed as an example. The progress of load-displacement for the whole structure-- cylindrical latticed dome & columns is record. 本文利用结构分析软件ANSYS,以某机场航站楼单层柱面网壳结构为例,追踪了柱面网壳+支承柱这一整体结构的荷载-位移全过程。
- The software ANSYS and MATLAB were employed to analyze and simulate the velocity,pressure, shear stress and viscosity distribution in fishtail sheet extruder die based on the three-dimen-sional FEM. 本文利用ANSYS和MATLAB软件,对鱼尾型片材机头中熔体的速度、压力、剪切应力和粘度的分布进行三维有限元模拟和分析。
- The thesis simulates the process of the spline forming by the FEM software. 应用有限元分析软件,对花键轴的齿形成形过程进行模拟。
- A finite element 3-D model of the bellow was put forward with the element of shell93 in the software ANSYS. 采用三维壳单元shell93,利用ANSYS8 0的参数化设计语言 (APDL) ,建立了波纹管的参数化三维有限元模型。
- Based on the finite element software ANSYS, the CFRP-confined concrete square columns were numerically simulated. 基于有限元程序ANSYS,对碳纤维布约束混凝土方柱进行了数值模拟。
- The simulation of roll forming with multiple passes was studied by FEM software ABAQUS. 利用ABAQUS软件对多道次辊弯成形数值模拟技术进行了研究。
- The cemented carbide drawing die was optimal designed by the finite element software ANSYS. 采用ANSYS有限元软件对硬质合金拉伸模结构进行了优化设计。
- This paper attempts to establish the optimal system using FEM software MARC combining with the optimal software IMSL. 中文摘要应用MARC有限元素分析软体，结合最佳化软体IMSL，建立MARC之最佳化系统。
