您要查找的是不是：
- In this paper,the authors studied the gas particle erosion wear characteristics of the expoxy adhesive composite coating by using a gas particle erosive wear testing device made by ourselves. 利用喷射式气固冲蚀磨损试验装置，研究了环氧胶粘复合涂层气固冲蚀磨损的特性。
- Erosion wear characteristics 冲蚀磨损特点
- This article introduces the technology characteristics and coating functions of LX88A, as well as the abrasion and erosion wear resistance processes. 本文介绍了LX88A制取的工艺特点及涂层性能,并分析了类似于流化床作业面所经受的冲蚀磨损与磨粒磨损过程。
- The erosion wear property of self-bonding SiC (RSSC) has been studied by erosion reducing grarity and microstruclune analyse methods. 采用磨蚀减重法及显微结构分析等方法，研究了反应烧结碳化硅（RSSC）的抗冲蚀磨损性能。
- The microstructure and wear characteristics of the coating were analyzed using XRD,TEM,SEM and EDS. 利用XRD、SEM和TEM分析了涂层的结构,用划痕法测定了涂层的结合力。
- The development of the applications of such technology in SOFC, photocatalysis, TBCs and superior erosion wear resistance coatings is summarized. 综述了该技术在SOFC、光催化、新一代热障涂层和超耐磨耐蚀涂层等方面的应用进展。
- Uuder the impact of sand particles, the erosion wear is initiating crack, propagating and eventually causing spalling of the coating. 涂层的冲蚀磨损失效机制为在磨粒的冲击下，涂层首先产生裂纹，裂纹沿弱结合处扩展最终导致涂层粒子剥落。
- With the increase in the arc current, the adhesive strength, microardness and abrasive wear resistance are increased, but erosion wear resistance is decreased. 提高喷涂功率，涂层结合强度、硬度、磨粒磨损性能提高耐冲蚀性能变差。
- Method for Indicating the Wear Characteristics of Petroleum and Non-Petroleum Hydraulic Fluids in a Constant Vane Pump (05. 恒定叶轮泵中石油和非石油液压液的耐磨损特性的显示方法(05。
- Ceramic-ceramic and metal-metal articulations are being ealuated because of their low coefficient of friction and superior wear characteristics. 由于摩擦系数低、抗磨性能强，人们对陶瓷对陶瓷及金属对金属关节进行了研究。
- This model can be used to predict wear of rotor bushing , to solve contact problem, and to analyze wear characteristics of the micro-rotor system. 该模型可用于预测微转子轴衬的磨损与接触状况;分析微转子系统的磨损特性.
- The dry sliding wear characteristics of the coating electrospark-deposited on 45 steel with Cr anode was studied with a ring-on-block tester. 用环块磨损试验机对铬电极电火花放电熔涂层的干摩擦滑动磨损特性进行了研究。
- The erosion wears mechanism and the effects of different abrasives on the wear of ceramic nozzles are investigated. 研究了陶瓷喷嘴材料的冲蚀磨损机理以及不同冲蚀磨料对陶瓷喷嘴冲蚀磨损的影响。
- From the theory analysis and experiments, it is shown that intergranular wear and cleavage wear are the main wear characteristics of PCD tools while machining HPL flooring. 研究表明聚晶金刚石刀具铣削Al_2O_3表层强化复合地板的过程中,刀具的磨损特征主要由沿晶磨损和解理磨损组成。
- The frictional and wear characteristics of conventionally heat treated and laser surface hardened high speed steels under sliding wear condition are studied. 研究了常规处理的高速钢和激光表面硬化的高速钢在滑动磨损条件下的摩擦磨损特性曲线。
- The sliding wear characteristics under boundary lubrication of the coating electrospark-deposited on 45 steel with Cr anode was studied with a ring-on-block tester. 用环块磨损试验机对铬电极电火花熔涂层及淬火低温回火态45%23钢的边界润滑滑动磨损特性进行了研究。
- According to the analysis of wearing curve by tests and wear topography by SEM, slurry erosion wear mechanism of modified epoxy adhesive coating was discussed. 浆体冲蚀磨损机制的分析讨论是结合磨损试验获得各种情况下的磨损曲线与扫描电镜观察到的磨损形貌进行分析的。
- The friction and wear characteristics of 45 steel pan against 45 steel pin under direct current magnetic field and at dry sliding friction and room temperature were studied. 在室温下,将45%23钢盘-销摩擦副置于直流线圈产生的磁场中,研究直流磁场对45%23钢干滑动摩擦磨损性能的影响。
- Xu B S, Dong S Y, Ma S N.Microstructure and friction wear characteristics of brush plated n-Al2O3/Ni composite coating[J].Materials Protection, 2002,35(6):6-8. [5]徐滨士;董世运;马世宁.;n-Al2O3/Ni复合刷镀层的组织和摩擦磨损特性[J]
- Erosive wear behavior of chemical vapor deposited multilayer tungsten carbide coating. 化学气体的侵蚀损耗作用形成多层碳化钨外壳。
