您要查找的是不是：
- Polyester film,inductive, epoxy resin coating. 聚乙酯膜，有感结构，环氧树脂包封。
- Epoxy resin coating creates excellent performance in humidity resistance, mechanical strength and heat resistance. 环氧树脂封装,从而具有优良的防潮性能、机械强度及耐热性。
- CL21 are non-inductively wound with metallized polyester film as the dielectric/electrode with copper-clad steel leads and epoxy resin coating. CL21为无感结构，用金属化聚酯膜为电介质／电极绕制而成，导线采用镀锡铜包钢线，使用环氧树脂包封。
- CL21X are non-inductively wound with metallized polyester film as the dielectric/electrode with copper-clad steel leads and epoxy resin coating. CL21X为无感结构，用金属化聚酯膜作为电介质／电极绕制而成，导线采用镀锡铜包钢线，使用环氧树脂包封。
- MPC are non-inductively wound with metallized Polyester dielectric/electrode and copper-clad steel leads with epoxy resin coating. MPC无电感性，用聚丙烯膜介质和铝箔绕制，用铜覆盖钢引线作电极，用环氧树脂作外被层，适合于长期稳定的高频电路。
- Are non-inductively wound with metallized polyester film as dielectric/electrode with copper-clad steel leads and epoxy resin coating. 为无感结构，用金属化聚酯膜作为电介质/电极绕制而成，导线采用镀锡铜包铜线，使用环氧树脂包封。
- CBB21 are non-inductively wound with metallized polypropylene film as the dielectric/electrode with copper-clad steel leads and epoxy resin coating. CBB21为无感结构，用金属化聚丙烯膜作为电介质／电极绕制而成，导线采用镀锡铜包钢线，使用环氧树脂包封。
- Structure: Adopting two film with positive &no getive temperature coefficient of inter-compensation as dielectric, AL foil as electrode, unidirectional lead, epoxy resin coating. 结构：采用正、负温度系数互相补尝的两种薄膜作介质，铝箔作电极卷绕而成，单向引出，环氧树脂包封。
- PPS are non-indectively woud with Polypropylene dielectric and metallized Polypropylene film in series with aluminum foil for electrodes using copper-clad steel leads and epoxy resin coating. PPS无电感性，用聚丙烯和金属聚丙烯膜与铝箔串联绕制，用铜镀层钢引线作电极，用环氧树脂作外包装，宜于高频和高脉动增长时间电路。
- PPS are non-inductively wound with polypropylene,dielectric and metallized polypropylene film in series with aluminum foil for electrodes using copper-clad steel leads anf epoxy resin coating. PPS为非感应式,用聚丙烯电介质和镀金属聚丙烯薄膜串联以铝箔为电极绕制而成，导线采用镀锡铜包线，采用环氧树脂包封。
- Reaction with GMA and photoinitiator, UV-Curable waterborne epoxy resin coatings have been prepared. 在制备光固化水性环氧涂料的过程中，讨论了环氧开环和引入GMA的意义。
- PPN are non-indectively woud with Polypropylene film dielectric and aluminum foil electrodewith copper-clad steel leads and are epoxy resin coated. PPN无电感性，用聚丙烯膜介质和铝箔绕制，用铜覆盖钢引线作电极，用环氧树脂作外包装。
- PEI are inductively wound with polyester film dielectric and aluminum foil as the electrode with copper-clad steel leads and epoxy resin coated. PEI是感应式，用聚酯薄膜电介质和铝箔为电极绕制而成，导线采用镀锡铜包铜线，具有环氧树脂包封。
- CBB81 are non-inductively wound with polypropylene film as the dielectric and aluminum foil as the electrode with copper-clad steel leads and epoxy resin coated. CBB81为无感结构，用聚丙烯膜作为电介质和铝箔为电极卷绕而成，导线采用镀锡铜包钢线，使用环氧树脂包封。
- The epoxy resins coating has good properties, for example, high cured rates, good mechanical properties and moderate adhesion to a quartz substrate. 改性涂料具有固化迅速、机械性能好、与石英基质有良好的附着力等优点，又具有良好的柔顺性。
- curing agent for epoxy resin coating 环氧树脂漆固化剂
- thermosetting epoxy resin coating [化] 热固化环氧树脂涂料
- waterbome epoxy resin coating material 水性环氧树脂涂料
- The method of using Epoxy resin coated bar is used for the construction of center column for thickener,which pre vents the reinforced bar in the foundation of center column from corroding. 同时采用环氧树脂涂敷钢筋这一新技术解决浓缩池中心柱基础钢筋防腐问题。
- According to doctors analysis, this toxic gases for industrial workers symptoms of poisoning, water tanks, epoxy resin coatings firming agent for the dissemination of suspected gas poisoning. 据医生分析，这名工人症状为工业有毒气体中毒，水箱内环氧树脂固化剂涂层散发的气体被怀疑为其中毒原因。
