您要查找的是不是：
- Study on Performance of Room - temperature Fast - curing Two - component Epoxy Acrylate Adhesive 室温快固型双组分环氧丙烯酸酯胶黏剂性能研究
- Epoxy acrylate adhesive 环氧丙烯酸酯胶黏剂
- To compare with epoxy acrylate, the film of modified epoxy acrylate have been improved more markedly on flexibility, glossiness and adhesive force. 和未改性树脂相比，涂膜的柔韧性显著提高，光泽度增加，附着力变好。
- Through vulcanization curves evaluation ammonium benzoate was selected as the vulcanizing agent of epoxy acrylate rubber (EACM). 通过硫化曲线评定，选用苯甲酸铵作硫化剂对环氧型丙烯酸酯橡胶低温胶进行硫化。
- Adipic acid modified epoxy acrylate pigment wetting and dispersing agent is synthesized. 合成了己二酸改性环氧丙烯酸酯颜料润湿分散剂;
- Epoxy acrylates are the workhorses of the industry. 环氧丙烯酸酯是这个产业的主流。
- The influences of the dosage of HEA (or HPA,GMA)and ratio of component A and B on the capability of two-component acrylate adhesive were studied. 研究了自交联丙烯酸酯的用量及A组分与B组分的配比对双组分丙烯酸酯胶粘剂性能的影响。
- Epoxy acrylate (EA) resin is an important photosensitive resin, in which bisp henolic epoxide was most widely used in the field of UV curing coating. 环氧丙烯酸(EA)树脂在辐射固化领域中是一种重要的感光树脂，其中双酚A型环氧树脂的应用最为广泛。
- The photocuring process of epoxy acrylate resin was studied by differential photo-calorimetric(DPC) method in this paper. 采用光差扫描量热法考察了环氧丙烯酸酯的光固化动力学行为。
- The application of acrylate adhesive in FCCL was researched.And the FCCL showed good flame resistance,excellent solder resistance,high peeling strength and chemical resistance. 并研究了不同配比的丙烯酸酯胶粘剂制得的挠性覆铜板的阻燃性能、力学性能和热学性能。
- The two-compontent acrylate adhesive modified with different AN content of NBR was studied. The results indicated that the transparence increased with the AN content increasing. 研究了不同丙烯腈含量的丁腈橡胶(NBR)对双组份丙烯酸酯胶粘剂进行改性,结果表明随着丙烯腈含量提高,固化物透明度增加。
- Research progress of UV-curable oligomers which were mainly epoxy acrylate resin and polyurethane acrylate were reviewed. 摘要综述了UV固化低聚物（主要是环氧丙烯酸酯和聚氨酯丙烯酸酯）的研究进展。
- The title UV curing coatings is prepared based on epoxy acrylate, reactive diluents and photoinitiator.The main raw materials and cured film are tested with TGA. 以环氧丙烯酸酯、活性稀释单体、光引发剂等为原料,制备UV固化涂层,对主要原料及固化后的涂层进行了热失质量分析。
- In order to overcome the disadvantage of low rubfastness of conventional pigment dyeing , a new type covering pigment with ultramicro azo dye as core and acrylate adhesive as shell was presented. 为克服常规涂料染色摩擦牢度低的弊病,作者提出采用以超微偶氮颜料为核,以丙烯酸酯类粘合剂为壳的新型颜料包覆体染色新的探索途径。
- The UV curable coating of fiber ribbon was prepared by blending bisphenol A epoxy acrylate(EA) and polyurethane acrylate(PUA)and adding reactive diluent,photoinitiator and pigment. 采用双酚A环氧丙烯酸酯(EA)和聚氨酯丙烯酸酯(PUA)共混,加入活性稀释剂、光引发剂、颜料等制备了紫外光固化光纤涂料。
- The result of performance test showed that the maleic anhydride and polyethylene glycol 400 monoester was the best to improve the viscosity of epoxy acrylate and the best mule ratio was 0.1. 实验结果表明：马来酸聚乙二醇400单酯改善体系黏度的效果最好且与环氧树脂的当量比为0.;1:1时最佳；
- Heat-resistant acrylic adhesives. 耐热的丙烯酸粘接剂
- Appl yin g VS/MA copolymer with epoxy acrylate and pentaerythritol triacrylate as a photo sensitive resin， it can give a clear image after UV expose and developing with alkaline water. 应用乙烯基螺环原酯/马来酸酐共聚物与改性环氧 丙烯酸酯和季戊四醇三丙烯酸酯组成感光树脂，经曝光和碱水显影加工可获得清晰的图像。
- Based on the principle of HLB, a scheme of epoxy acrylate modified with maleic anhydride was designed, and carboxylated acrylate epoxy with good water dispersity was synthesized successfully. 根据亲水亲油平衡值(HLB)设计了以马来酸酐改性环氧丙烯酸酯的方案,合成了具有良好水分散性的羧基化环氧丙烯酸酯树脂。
- Copper foil tape with acrylic adhesive for specialty EMI/RFI shielding and protection. 铜箔，无导电性压克力胶系，适合用于EMI/RFI遮蔽，可焊锡。
