您要查找的是不是：
- Suited for DC powered switching gear，multiplex，SDH，PDH，switching-mode power supply and electronic instruments. 适用于程控交换机、光端机、开关电源以及直流供电设备。
- DC power switch 直流开关电源
- Operation From DC Power Supply: Batteries. 使用直流电源：干电池。
- This paper base on the design of 28V600A DC power. 介绍以28V600A直流电源设计为背景。
- I got to turn the main power switch back on. 我得去把主开关打开。
- The switch may be coupled between the rechargeable battery and a DC power source and capable of moving between conducting and non-conducting states. 该开关可以连接在可充电电池和一个直流电源之间并且能够在导通和非导通状态之间转换。
- Other: PK control panel, GZDW microprocessor-based high-frequency switch DC power supply cabinet, JKR (PGR, GCR, GDR) the exchange of low-voltage motor starter cabinet. 其它：PK控制屏、GZDW微机型高频开关直流电源柜、JKR(PGR、GCR、GDR)交流低压电动机起动柜。
- CBF series are able to be applied to large current DC power line. CBF系列的晶片能够应用于大电流的直流电源信号线.
- The POWER switch was turned off, so the backup was aborted. 备份功能开关是关闭的,因而备份的是失败的。
- AC or DC Power: 500mA peak start-up current for 10 msec. 交流或直流电源： 500mA峰值启动电流为10毫秒。max.;马克斯。
- Do turn off the power switch when firing to avoid fire coming out. 点火时必须关掉气源。以免点火时火从炉内喷出。
- Specially designed for suppressing DC power line disturbances. 专为抑制直流电源线干扰而设计.
- Set up power switch which can be manually adjusted freely. 设置电源开关,可以自由手动调节。
- The smaller white box next to the HV Power Supply is a variable low voltage DC power supply and is used to actuate the solenoid on the vacuum relay (discharge switch). 在高压电源旁边的那个小一点的白色盒子是一个可调的直流电源，用来驱动真空继电器的线圈（放电）。
- The 125 volt DC power system supplies power to the low draft trip switches. 应翻译为125伏特直流电源系统为低负压跳车开关供电。
- Prolong the life time of electrical apparatus and power switch, cut your cost. 延长电器、开关的使用寿命,大大降低使用成本。
- Power switch; Origin data set; Absolute and incremental measurement conversion. 开关;起始值设置;绝对和相对测量转换。
- Never turn your computer off with the power switch until Windows has shut down. 在 Windows 未关闭之前千万别用机箱上的电源按钮来关闭计算机。
- If necessary,plug the DC power supply cord into the WinAIP Interface Box and the power supply into an AC outlet. 如果必要，将 DC 电源线插入 WinAIP Interface Box，并将电源插到 AC 插座上。
- On the condition without DC power, the SCR could be used to realize dynamic braking. 在无法取得直流电源的情况下，利用可控硅元件，也可实现能耗制动。
