您要查找的是不是：
- Composite electrode system 复合电极体系
- The poly (3-methylthiophene) is used as electroactive material and mixed with acetylene black and P(VDF-HFP) to prepare a composite electrode. 由此得到的活性物质与乙炔黑、偏氟乙烯-六氟丙烯共聚物(P(VDF-HFP))混合制成复合电极。
- A rotating disc electrode system was designed to recover Cd and the current efficiency was over 90%. 设计出新型旋转圆盘电极体系回收金属镉,电流效率达到90%25以上。
- MnO_2/activated carbon composite electrode materials were also prepared by chemical co-precipitation method. 利用化学共沉淀法合成了MnO_2与活性碳复合材料。
- Figure 7 Synthetic galvanic cell model of a welded joint as multiple electrode system. 图7焊接接头作为一个多电极体系的原电池组合关系。
- The change of equivalent impedence of the electrode system is used to explain the neutral linearity electrolyte change into nonlinearity in PECM. 利用电极体系的等效阻抗的变化来解释脉冲电解中线性电解液非线性化的现象;
- Platinum composite electrode was prepared that platinum was compounded on titanium,tantalum,and niobium substrates by proper technology. 铂复合电极是通过适当的工艺将铂复合在钛、钽、铌等基体上。
- Aqueous solution plating and metallurgy composite were main methods of preparing platinum composite electrode at present. 水溶液电镀和冶金复合是目前最常用的制备铂复合电极的方法。
- Activated carbon/ carbon black (AC/CB) composite electrode materials are prepared by utilizing ultrasonic mixing technology. 首次提出采用超声混合技术制各不同比例的活性炭/炭黑复合电极材料。
- Compared electrochemical p roperties of activated carbon electrode with those of composite electrode, the r esult showed the product's cost could b... 通过比较活性炭电极和复合电极的电化学性能,说明添加体型酚醛树脂可以显著降低原料成本,不用固化而提高了其电化学性能。
- Fused salt electrodeposition,magnetron sputtering and chemical vapor deposition were also methods of preparing platinum composite electrode. 此外,铂电极复合方法还有熔盐电镀,磁控溅射,化学气相沉积等,指出了各种方法的优缺点及发展方向。
- La_(0.85)Sr_(0.15)MnO_3-Ce_(0.7)Bi_(0.3)O_2 (LSM-CBO) composite electrode for ITSOFC (intermediate temperature solid oxide fuel cell) has been prepared by citrate-gel method. 采用柠檬酸络合法为中温固体氧化物燃料电池制备了La0 .;85Sr0
- The test results with the needle-plane electrode system under ac voltage at 77 K indicate that the fatigue break in UHMW-PE under mechanical forces during the electrical treeing is a critical factor. 结果表明，机械应力下疲劳强度的劣化是低温电树枝化的重要因素。超高分子量聚乙烯具有低温性能好。
- To analyze the formation of surface discharge on a dielectric plate under positive nanosecond impulse voltage in air,a wire to plane electrode system with a barrier of negative film was used. 采用感光胶片作为阻挡介质的针-板放电系统,解析空气中固体电介质上纳秒正脉冲表面放电的形成过程。
- In the present study, Pb-WC composite electrode was prepared by using technique of composite electroplating and was used for the cathodic reduction reaction of hydrogen ions in cid (especially in H_2SO_4) solution. 本研究工作采用复合电镀技术,制备了Pb-WC复合电极,并将其用于酸性溶液(尤其是H_2SO_4)中氢离子阴极还原反应。
- hydrogen platinium electrode system 氢-铂电极系统
- L.- C. Clark, C. Lyons, “Electrode systems for continuous monitoring incardiovascular surgery,”Annals of the New York Academy of Sciences 102, 29-45, (1962). 刘盈村，光纤式表面电浆子共振生医微感测器，国立台湾大学医学工程研究所硕士论文，(2001)。
- Recording of Monophasic Action Potential Across the Left Ventricular Free Wall in Vivo With Composite Electrodes. 应用自制复合电极同步记录兔左心室游离壁三层心肌的单相动作电位。
- The performances of Composite Electrodes in welding can be much improved by adding two or more rare earth oxides which are mutually completementary. 复合电极是在钨中添加了两种或更多种的稀土氧化物，各添加物互为补充，相得益彰，使其焊接性能更出众。
