您要查找的是不是：
- Composition Design of a New Cobalt Base Superalloy and Its Microstructure and Properties 新型钴基高温合金成分设计及其组织与性能
- cobalt base superalloy 钴基高温合金
- Hard Facing is weld deposited Cobalt base alloy. 硬面焊接钴基合金沉淀物。
- Study on a Nickel Base Superalloy FGH95 of Turbine Disc? 镍基粉末高温合金FGH95涡轮盘材料研究
- "STELLITE -- Cobalt base alloy, one of the best all-purpose hard facing alloys. 钨铬钴合金--钴基合金,一种最好的多用途坚硬表面的合金。
- The effect of inverted two-stage aging on microstructure and properties of a Ni base superalloy has been studied. 研究了固溶+两段时效热处理工艺对镍基高温合金组织及性能的影响。
- A Ni base superalloy columnar preform were produced through nitrogen spray atomization and deposition. 利用氮气雾化喷射沉积技术成功地获得了宇航用变形镍基高温合金柱形坯。
- AMG cobalt based core can last for many 100 years without changing or reducing quality. AMG之任何鈷鐵鎳材帶材成品，長期使用下性能不會降低。
- A series of contrastive experiments on the cobalt based composite coatings and the 45 hardened steel are fulfilled by a pin-on-disc abrasion machine. 应用盘销式摩擦磨损试验机对复合涂层材料和淬火态 45钢进行了磨损对比试验。
- Low cycle fatigue (LCF) tests of a directionally solidified nickel base superalloy were conducted at elevated temperatures. 本文研究了一种定向凝固镍基高温合金的高温低周疲劳行为。
- RESTALL J E, TOULSON E C. Constitution and microstructure of certain cast nickel base superalloy [J].Metals and Materials, 1973, 7(3): 134 - 140. 中国航空材料手册编辑委员会.;中国航空材料手册(第二版)第二卷(铸造高温合金变形高温合金)[M]
- A method for the determination of ferrum content in cobalt based alloy dust by Air-C 2 H 2 flame atomic absorption spectrophotometry was set up. 建立了一种用空气-乙炔火焰原子吸收法测定钴基合金喷粉中铁含量的分析方法,探讨了硅对铁测定的干扰机理,对用氯化钙作为硅干扰铁测定的释放剂进行了试验。
- Surface grain refinement of turbine blades in Ni based superalloy K18 were studied by comparison of experimental results in different alloys and mold surface materials. 选用K18合金和纯金属镍及不同的面层细化料,通过实验对比研究了镍基高温合金叶片表面晶粒细化机理。
- Recent progress in study of cobalt based CO hydrogenation catalysts and their applications to synthesis of alcohol, olefine and long chain hydrocarbons are presented. 介绍了Co基催化剂在低碳混合醇合成、烯烃合成和长链烃合成中的应用研究进展。
- The effect of laser shock processing on the microstructure, hardness and residual stress of an austenitic steel 1Cr18Ni9Ti and a Ni base superalloy GH30 is studied as a functions of laser shock processing variables. 利用激光冲击强化技术分别对奥氏体不锈钢 1Cr18Ni9Ti和镍基高温合金 GH30进行了表面强化处理 ;观察了激光表面强化处理后 1Cr18Ni9Ti和 GH30显微组织与结构的变化 ;测定了1Cr18Ni9Ti和 GH30的显微硬度和残余应力 .
- The Microstructure of a cast nickel base superalloy M963 treated by high temperature treatment of melt was investigated and the room and high temperature tensile properties of the alloy were determined in the as cast and heat treated conditions. 研究了经 16 5 0℃高温熔体处理后的铸造镍基高温合金M96 3在铸态和热处理态的显微组织 ,测定了其室温和高温拉伸性能。
- WT5BZ]The failure feature is producing the black protruding corrosion spot on the oxide scale for the aluminide coating on the Co base superalloy DZ40M during high temperature oxidation in air. DZ40 M钴基合金铝化物涂层在高温氧化过程中的失效特点,是在氧化膜之上产生隆起的深色蚀点。
- Cobalt Based Alloy Powder for Laser Cladding 激光熔覆用钴基合金粉末的研究
- single crystal nickel based superalloy 单晶镍基合金
- An infrared absorption method for the determination of trace sulfur in nickel base superalloys was presented. 应用红外碳硫测定仪,对镍基高温合金中痕量硫的测定方法进行了研究。
