您要查找的是不是:
- The Influence of Abrasive Size on shot blasting Efficiency and Casting Surface Roughness 钢丸粒度对铸件抛丸清理效率和表面粗糙度的影响
- Casting surface roughness 铸造表面粗糙度
- Head dresser is secured high surface rough. 高精粗糙度修整装置。
- Effect of different dental polishing methods on cobalt-chromium casts surface roughness and accuracy 不同抛光方法对钴铬合金铸造义齿表面粗糙度及精度的影响
- Table 1-2 Surface roughness and chrominance of treated wood. 表2处理材于水质环境下经长期试验后防腐剂之保留率.......57
- Surface roughness has a profound effect on wind speed. 地表粗糙度对风速有相当深刻的影响。
- A New Noncontact Method for Rapidly Measuring Surface Roughness[J]. 引用该论文 胡克平;李田泽.
- Sandblasting to achieve the desired surface roughness. 清洁辊筒表面,边缘倒角。
- The adding of POSS in the polymer lowered the surface roughness. 添加POSS后聚合物表面粗糙度减小。
- Cast molding and replica molding were used to fabricate PDMS membrane.It showed that the chip fabricated has several advantages such as high reproduction and surface roughness. 研究了模塑法、再铸模法等成型PDMS微通道结构膜的方法,获得了具有高保真度和较高表面光洁度的结构膜。
- Effects of different preparation procedures on abutment surface roughness. 不同预备程序对基牙表面粗糙度的影响。
- The steel casting surface carburizing was studied in several series of tests using EPS, PMMA, EPS-PMMA pattern. 试验研究了EPS,PMMA,EPS-PMMA共聚物模样铸钢件表面增碳的规律。
- Grainy edge Surface roughness on edges of web caused on the drying process. 起皱纸边纸卷边缘在乾燥过程所引致的起皱情况。
- The surface hardness of medium manganese austenite steel's is increased remarkably by using the casting surface alloy. 通过铸造表面合金化方法,使中锰奥氏体钢表面硬度提高。
- The amount and the depth of carburizing on the casting surface can be obtained approximately by a calculating formula. 给出了铸件表面增碳大小及增碳层深度的近似计算公式。
- Grainy edge: Surface roughness on edges of web caused on the drying process. 起皱纸边:纸卷边缘在干燥过程所引致的起皱情况。
- Surface roughness of the MSD MCrA1Y coating is far lower than the one of LPPS. MSD的MCrA1Y涂层表面粗糙度远比LPPSMCrA1Y低。
- Problems such as drill life exit burr and machined surface roughness etc. 对采用超声波振动钻削微小孔时钻头的寿命、出口毛刺和加工表面粗糙度等问题进行了研究。
- It can be reduce remaind strength and improve collapsibility but withsufficient green and high temperature strength and casting surface quality. 文中讨论了发泡涂料中气泡分布状态、密度、粘度、屈服值和涂片重等。
- Wood surface roughness was studied by using fractal dimension method. 应用分形维对木材表面粗糙度特征进行研究。