您要查找的是不是:
- Blow mold clamping force ton 吹模锁模力
- The important factors influencing the screw backpressure, injection pressure, packing pressure and mold clamping force as well as their setting means are presented. 概述了影响注塑机螺杆背压、注塑压力、保压压力和锁模力的重要因素及其设定方法。
- Clamping force of blow mold 吹塑模合模力
- mold clamping force 合模力
- By setting strainometers on mold, the authors adopt strain principl to detect the clamping force of injection machine and realize acquisition, display and processing of data by computer. 本文采用应变原理,通过在假模上放置应变片来检测注塑机锁模力,并由计算机实现数据采集、显示和处理等。
- Established in1978, Kwong Yu Plastic Factory Ltd. specializes in PVC Compounds- Injection, Extrusion and Blow mold Type. 光裕塑胶厂有限公司于1978年在香港开业,二十多年来专业产销符合欧、、各国家不同的安全标准-原色和透明之聚氯乙烯胶粒。
- Clamping force equalization: same force to two workpieces in different size. 自动补偿机构:不同大小工件,可在同时夹紧,且夹持力相同。
- Parison formation is a critical stage in extr usion blow molding. 型坯成型是挤出吹塑中的一个重要阶段。
- Clamping force of injection mold 注射模合模力
- Size and grade specific cap bolts offer superior clamping force between the cap and base. 座罩螺栓有不同的尺寸和等级,在座罩和基础之间形成理想的夹持力。
- In using an injection moulding machine, it is best to use the minimal but adequate clamping force F. 使用注射成型机,最好使用最小同时充足的锁模力F。
- Parison formation is a critical stage in plastics extrusion blow molding. 型坯成型是塑料挤出吹塑中的一个重要阶段。
- The two deices do clamping force measurement/control and caity pressure switchoer to holding pressure. 这两个装置就是锁紧力量测/控制装置和(射出)转保压的模腔压力转化装置。
- Choosing a PIMM simply on the basis of shot weight is too simplistic.Neither is clamping force alone sufficient. 仅仅基于射出重量去选择注塑机是不够的,同样的,仅考虑锁模力也不可以。
- The pirates captured the ship and a ton of gold at a blow. 海盗们闪电般取了船和一吨黄金。
- Furthermore, a high clamping force compresses the toggles and the mould, and stretches the tiebars, reducing the fatigue lives of the toggle pins, the mould and the tiebars. 高锁模力对曲轴结构和模具产生挤压,对拉杆(控制开合模甚至锁模的四个大杆)产生拉伸,从而降低他们的疲劳寿命。
- Name: Auto PET blow mold machine 产品名称:全自动PET吹瓶机
- An excessive clamping force distorts the mould and the mould cavity unnecessarily, affecting the precision of the moulded part. 过大的锁模力会使模具以及模腔产生不必要的变形,影响成型品的精度。
- This paper focus on simulating the KM toolholder taper interface positioning under different clamping force by using Finite-element Method. 针对KM刀柄锥面定位在不同夹紧力下进行有限元模拟,得到径向位移、接触应力、锥面间隙结果。
- The produts adopt international advanced technology and produced by cored blow molding machine. 本产品采用国际上较为先进的中空成型机生产。