您要查找的是不是：
- The amorphous Fe Cr alloy coatings were obtained by controlling the composition of bath operation conditions. 本实验通过控制镀液组成和操作条件获得了非晶态铁-铬合金镀层。
- Ni-based and Co-based alloy coatings were made on the Q235 steel substrate by oxy-acetylene flame spraying and fusing. 采用氧乙炔火焰喷熔法在Q235钢表面制备了镍基和钴基合金涂层。
- Co-Ni alloy coatings were electrodeposited from a sulfate plating bath and sulfate plating bath containing sodium citrate. 分别在硫酸盐镀液和添加柠檬酸钠的硫酸盐镀液中电沉积钴-镍合金。
- The surface appearance and corrosion products of Zn-Mg alloy coatings with different content of Mg were analyzed by SEM and XRD. 采用扫描电镜和X射线粉末衍射,对含镁量不同的热镀锌镁合金镀层表面形貌和腐蚀产物进行了分析。
- It was shown that the two kinds of Fe-based alloy coatings were subjected to serious low temperature hot corrosion, which was characterized by accelerated oxidation. 试验结果表明，两种铁基合金涂层发生了较严重的以加速氧化为特征的低温热腐蚀。 两种镍基会金涂层具有良好的耐蚀性能。
- In this paper,a physical model about the effect of composition demixing between alloy coatings and alloy cathode material in multi arc ion plating is proposed. 提出了一种关于多弧离子镀合金涂层成分离析效应的物理模型。
- With laser cladding Co-base alloy coatings, the high temperature hardness and thermal fatigue resistance of H13 hot-working die surface were appreciably increased. H13热作模具钢表面经激光熔覆钴基合金后显著提高了模具的高温硬度和热疲劳抗力。
- The results showed that the grain size and the corrosion resistance of the alloy coat on tinplate increased as the reflowing time exten... 结果表明,随着软熔时间的延长和软熔温度的升高,镀锡板合金层的晶粒度增大,镀锡板的耐蚀性增强。
- The corrosion resistance of the alloy coat on tinplate was directly related to the life span of the tinplate as a food packaging material. 镀锡板合金层的耐蚀性好坏直接关系到镀锡板用作食品包装材料时的寿命。
- Tin whiskers, growing spontaneously from Sn and Sn alloy coatings, can cause electrical shorts in the circuit and present a long-term reliability problem to the electronic industry. 锡须，一种自发从锡和锡合金层生长出来的现象，它会导致电路短路,影响电子产品长期的可靠性。
- Reflector: High temperature processed, layers of alloy coating films. 反射：高温处理后，合金涂层层薄膜。
- The production practices prove that bright Sn-Pb alloy coatings with fine and compact crystal structure, excellent solderability and in different Pb content can be obtained from the plating bath made up with the above concentrates. 生产实践证明;该镀液能获得不同铅含量的、可焊性优良且镀层结晶细致而光亮的Sn-Pb合金镀层.
- In this work, the initial deposition behavior, microstructure, corrosion-resistance and abrasion resistance of Ni-P alloy coatings are studied systemically on the base of successful development of electro-deposition technology with industrial value. 本文在研究成功具有工业生产价值的电沉积工艺的基础上，对电沉积Ni-P合金的初期沉积行为，组织结构，耐蚀及耐磨性能进行了系统的研究工作。
- The influences of heat treatment on structure micro hardness, static corrosion resistance in normal temperature and hot solution corrosion resistance of electroless Ni P and Ni Co P alloy coatings were studied. 研究了热处理对化学沉积Ni－P、Ni－Co－P合金镀层的组织结构、显微硬度、常温静态腐蚀性能和热溶液腐蚀性能的影响。
- This paper deals with the chemical.composition of the solutions and the aging technology for composite chemical deposition of amorphous Nickel-Phosphorous-Al_2O_3 alloy coatings on GCr 15 steel. 为了进一步发挥化学沉积单一非晶态镀层的性能潜力,研究了化学沉积镍磷合金镀液中添加三氧化二铝微粒以获得镍-磷-三氧化二铝复合层的新工艺。
- Zinc alloy coatings can be obtained from suitable range of bath, and it has attracted a great attention due to their unique high corrosion resistance, low hydrogen brittleness and chemical stability. 锌合金镀层可以在适宜的镀液中比较容易的沉积出来,它具有优异的耐蚀性、低氢脆性和化学稳定性,已引起人们的极大关注。
- The corrosion resistance of these coatings is better than that of mechanical Zn plating coating,especially CuNi alloy coating is the best. 这些铜及铜合金镀层的耐蚀性能皆好于机械镀锌层,尤以铜-镍合金镀层的耐蚀性能最高,提高15倍左右;
- I got a new coat in that store last week. 上礼拜我在那家店买了一件新外套。
- The technique of hot dip Zn-Ni alloy coating is an effective method for solving the reactive steel problem in hot dip galvanizing. 热浸锌镍合金镀层技术是解决活性钢热镀锌问题的有效方法。
- The tensile properties and corrosion resistance of hot dip 55%Al Zn alloy coating steel are investigated. 研究了热浸镀 5 5%25Al Zn合金镀层钢的室温拉伸性能和耐蚀性能。
- 今日热词
-
- 深远海浮式风电平台 - deep-sea floating wind power platform
-
- 京雄高速公路 - Beijing-Xiongan expressway
-
- 农业及相关产业增加值 - the added value of agriculture and related industries
