您要查找的是不是：
- Al Mg alloy Al-Mg合金
- EFFECT OF TRACE Sc AND Zr ON GRAIN REFINEMENT OF AS CAST Al Mg ALLOYS 微量Sc和Zr对Al-Mg合金铸态组织的晶粒细化作用
- The influence of double aging low temperature hardening transformation(LTHT) on the mechanical property of Al Mg Si RE alloy was studied. 研究了双重时效的低温形变热处理（LTHT）对Al?Mg?Si?RE合金力学性能的影响。
- Zn- Mg alloy coating 锌.;镁合金镀层
- The microstructure, mechanical properties and deformation characteristics have been studied for a cast Al Si Mg alloy A357 treated under different aging conditions. 研究了Al?Si?Mg系A357合金在不同时效状态下的显微组织、力学性能及形变特性。
- The bond strength of Ni-P coating on Mg alloy AZ91D is studied with metalloscope,SEM,EDS. 利用金相显微镜、SEM、能谱仪(EDS),研究了镁合金AZ91D的化学镀Ni-P的结合强度。
- An uniform zinc phosphate coating was fabricated on the surface of AZ91D Mg alloy. 在AZ91D镁合金表面制备了细致均匀的锌系复合磷化膜。
- The tensile properties and corrosion resistance of hot dip 55%Al Zn alloy coating steel are investigated. 研究了热浸镀 5 5%25Al Zn合金镀层钢的室温拉伸性能和耐蚀性能。
- Differential scanning calorimetry(DSC), electron probe microanalysis(EPMA) and rapid solidification were adopted to study the effects of Ni and Mn on the microstructure, solidification process and aging hardening characteristics of Al Si Cu Mg alloy. 采用DSC差热分析及急冷试验方法并辅以微区成分分析 ,探讨了Ni和Mn对Al Si Cu Mg四元合金凝固组织、凝固过程及时效硬化特性的影响。
- The white corrosion products on hot dip Zn Al alloy coating exposed to seawater in dynamic aerated immersion were investigated by means of XRD and TEM. 采用XRD和TEM对热浸锌铝合金镀层在动态充气海水全浸试验时所形成的白色腐蚀产物进行了研究。
- Al alloy and Mg alloy are the most widely used light alloys, so it is very significant to apply EPM to preparation and process of this kind of material. 铝镁类轻合金是世界上使用最多的轻质合金，将材料电磁工艺用于此类材料的制备和加工过程中有着重要的意义，围绕电磁场对铝镁合金组织性能影响规律的研究是充分利用好这一工艺的关键。
- The strengthening mechanism of Zn Al Cu pseudo alloy coating and relationship among hardness,aging temperature and time are studied by SEM,XRD,EDX and hardness test. 利用扫描电镜(SEM )、X射线衍射分析 (XRD)、能谱分析 (EDX)和硬度测试等手段 ,对涂层的性能进行了测试 ,分析研究了Zn Al Cu伪合金涂层硬度与时效温度和时效时间的关系 ,并探讨了强化机理。
- electroplating copper clad Al - Mg alloy wire 电镀铜包铝镁合金丝
- Using the FEM, the deformation and stress field of a large-scale Mg alloy die casting machine have been calculated by ANSYS. 摘要压铸机的整体变形情况对压铸机性能和铸件质量有重要影响。
- By forming a bright,flat and compact nickel coating on Mg alloys surface through electroless nickel plating,the corrosion resistance of Mg alloys can be effectively improved. 在镁合金表面进行化学镀镍,生成一层光滑、平整、致密的镍镀层,能有效地提高镁合金的耐蚀性能。
- The results show that the room temperature yield strength and tensile strength of hot dip 55%Al Zn alloy coating steel are higher than those of low carbon steel (Q235) plates, and its elongation has not reduced. 结果表明 :Q2 35钢板经热浸镀 5 5%25Al Zn合金后的室温屈服强度和抗拉强度均高于Q2 35钢 ,而伸长率没有降低。
- Because Mg alloy has a low density and good performance,it has an extensive development and application potentiality. 镁合金由于质轻、性能良好等特点而具有广阔的开发与应用潜力。
- Reflector: High temperature processed, layers of alloy coating films. 反射：高温处理后，合金涂层层薄膜。
- The effect of mischmetal additions on the ignition temperature of ZM5 Mg alloy was investigated and compared with t. 针对ZM5镁合金,研究了混合稀土及其加入量对起燃温度的影响,并与纯稀土的阻燃效果进行了比较。
- Research, development, and application for RE-containing Al alloys and RE-containing Mg alloys is reviewed with the emphasis on the effect of RE elements on melting, processing, and alloying of alloys. 综述了含稀土铝合金和稀土镁合金的研究、发展和应用现状，著重介绍了稀土对铝镁合金冶炼、工艺和合金化的影响。
