您要查找的是不是：
- Al Mg alloy Al-Mg合金
- EFFECT OF TRACE Sc AND Zr ON GRAIN REFINEMENT OF AS CAST Al Mg ALLOYS 微量Sc和Zr对Al-Mg合金铸态组织的晶粒细化作用
- The influence of double aging low temperature hardening transformation(LTHT) on the mechanical property of Al Mg Si RE alloy was studied. 研究了双重时效的低温形变热处理（LTHT）对Al?Mg?Si?RE合金力学性能的影响。
- The microstructure, mechanical properties and deformation characteristics have been studied for a cast Al Si Mg alloy A357 treated under different aging conditions. 研究了Al?Si?Mg系A357合金在不同时效状态下的显微组织、力学性能及形变特性。
- Differential scanning calorimetry(DSC), electron probe microanalysis(EPMA) and rapid solidification were adopted to study the effects of Ni and Mn on the microstructure, solidification process and aging hardening characteristics of Al Si Cu Mg alloy. 采用DSC差热分析及急冷试验方法并辅以微区成分分析 ,探讨了Ni和Mn对Al Si Cu Mg四元合金凝固组织、凝固过程及时效硬化特性的影响。
- Al alloy and Mg alloy are the most widely used light alloys, so it is very significant to apply EPM to preparation and process of this kind of material. 铝镁类轻合金是世界上使用最多的轻质合金，将材料电磁工艺用于此类材料的制备和加工过程中有着重要的意义，围绕电磁场对铝镁合金组织性能影响规律的研究是充分利用好这一工艺的关键。
- electroplating copper clad Al - Mg alloy wire 电镀铜包铝镁合金丝
- Using the FEM, the deformation and stress field of a large-scale Mg alloy die casting machine have been calculated by ANSYS. 摘要压铸机的整体变形情况对压铸机性能和铸件质量有重要影响。
- The bond strength of Ni-P coating on Mg alloy AZ91D is studied with metalloscope,SEM,EDS. 利用金相显微镜、SEM、能谱仪(EDS),研究了镁合金AZ91D的化学镀Ni-P的结合强度。
- Because Mg alloy has a low density and good performance,it has an extensive development and application potentiality. 镁合金由于质轻、性能良好等特点而具有广阔的开发与应用潜力。
- The effect of mischmetal additions on the ignition temperature of ZM5 Mg alloy was investigated and compared with t. 针对ZM5镁合金,研究了混合稀土及其加入量对起燃温度的影响,并与纯稀土的阻燃效果进行了比较。
- An uniform zinc phosphate coating was fabricated on the surface of AZ91D Mg alloy. 在AZ91D镁合金表面制备了细致均匀的锌系复合磷化膜。
- Extrusion deformation can fine the grain of Mg alloy and increase its properties remarkably. 挤压变形可显著地细化镁合金晶粒并提高镁合金的力学性能。
- Research, development, and application for RE-containing Al alloys and RE-containing Mg alloys is reviewed with the emphasis on the effect of RE elements on melting, processing, and alloying of alloys. 综述了含稀土铝合金和稀土镁合金的研究、发展和应用现状，著重介绍了稀土对铝镁合金冶炼、工艺和合金化的影响。
- The importance of studying the mold filling velocity of Mg alloy in the expendable pattern casting (EPC) process is pointed out in this paper. 消失模铸造的充型过程对于获得健全铸件至关重要,研究工艺参数对镁合金消失模铸造充型速度的影响,对于工艺参数的优化和铸件质量的提高具有非常重要的理论和实用价值。
- Since its chemical character is very active, Mg alloy is prone to oxidation and burning, which makes it impossible to be melted and cast in air. 但由于镁的化学性质活泼，非常容易氧化、燃烧，导致镁合金无法在大气条件下直接进行熔炼和浇注。
- The production technology for Mg and Mg alloy powders are:grinding milling,atomisation,melting and recycling,turning and chipping. 由于镁及镁合金的独特性能,其粉末及粉粒通常用球磨法、铣削法、雾化法生产,特别是铣削法用得最多。
- Abstract: The microstructure of AZ61 Mg alloy made by the methods of normal cast and twin-screw rheo-cast was investigated. 摘 要: 采用双螺旋流变铸造技术制备镁合金AZ61铸锭，并与常规铸造组织进行对比。
- The electrochemical behavior of AZ31 Mg alloy was investigated by measuring anodic polarization curves and electrochemical impedance spectroscopy(EIS). 采用阳极极化和电化学阻抗谱(EIS)技术研究了AZ31镁合金的电化学腐蚀行为。
- Using the FEM,the deformation and stress field of a large-scale Mg alloy die casting machine have been calculated by ANSYS. 压铸机的整体变形情况对压铸机性能和铸件质量有重要影响。
