您要查找的是不是：
- Whether the adhesively bonded joints keep good vacuum tightness after experiencing repeatedly cooling and heating is an important factor that determines the durability of non-magnetic Dewar. 粘接接头在经历反复冷却、复温后能否保持良好的真空密封性,是决定无磁杜瓦耐用性的一个重要因素。
- It is believed that the interphase is responsible for transferring the stress from one adherend to another in adhesive bonded joints and is frequently the site of environmental attack. 在粘接接头中应力通过界相从一侧被粘接体传递到另一侧被粘接体,而且界相最易受环境影响而导致粘接失效,因此界相对粘接接头的性能,如强度、刚度、耐候性等起着非常重要的作用。
- NUMERICAL ANALYSIS OF THE EFFECT OF LAP LENGTH ON THE STRESS DISTRIBUTION OF ADHESIVELY BONDED JOINTS 搭接长度对胶接接头工作应力分布影响的数值分析
- Fracture of adhesively bonded joints and discussion of relative fracture criterions 胶接接头断裂及相关断裂准则探讨
- Experimental Study on the Deformation and Damage of Composite Adhesively Bonded Joints and Bimetal Solder Film 复合材料胶接及异材焊接界面形变与断裂的实验研究
- Keywords adhesively bonded joint;interface;weak interfacial film theory;wetting theory; 胶接接头;界面;弱界面层理论;润湿理论;
- single-lap adhesive bonded joint 单搭胶接接头
- Estimating the Percentage of Wood Failure in Adhesive Bonded Joints 胶粘连接时对木材破坏百分率的估算
- Adhesively bonded joints 粘结节点
- Effect of Recessed Bonding on Stress Distribution and Strength of Adhesively Bonded Joints 间隙连接对胶接接头应力分布和强度的影响
- Keywords Adhesively bonded joints;Lap length;Stress distribution;Finite element method;Adhesive fillets; 胶接接头;搭接长度;应力分布;有限元法;胶瘤;
- The effect of the recessing on the strength and stress distribution of adhesively bonded single-lap joints is discussed. 研究单搭接接头胶缝中预留间隙对接头拉剪强度和应力分布的影响。
- adhesively bonded joint 胶接接头
- Adhesively bonded Fiber Reinforced Polymers (FRP) on the surface of the damaged structures is an advanced repair method, which has been accepted by more and more engineers. 在结构损伤部位的表面粘贴纤维增强复合材料(FRP)进行加固修复是一种先进的结构修补方法,已被越来越多的工程人员所青睐。
- adhesive bonded joints 胶接接头
- Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines 用于航空喷气涡轮机燃料管线的胶粘剂结合型玻璃纤维(玻璃纤维增强热固树脂)管及管配件标准规范
- Standard Specification forFiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type Epoxy Resin, for Condensate Return Lines 用于冷凝回流管道的胶粘剂结合型环氧树脂玻璃纤维(玻璃-纤维-增强热固树脂)管及管配件标准规范
- Keywords Adhesively bonded joint;Recessed bonding;Stress distribution;Finite element method;Adhesive fillet; 胶接接头;间隙连接;应力分布;有限元法;胶瘤;
- The fatigue life of the bonded plates is 2.06 times relative to that of the cracked one. The critical crack length of plate increases from 17.86mm to 28.64mm before and after adhesively bonded repair with composite patch. 裂纹板的临界裂纹长度从17.;86 mm增加到28
- In this paper,capacity of bonded bar has been deeply studied in theory and the mechanism and failure mode of adhesively bonded bars in concrete subjected to tension have been invesigated. 本文对植筋胶的锚固性能进行了深入的理论分析，研究了植筋在拉拔力作用下的破坏性态和破坏机理。
