您要查找的是不是:
- 3D deformation rule 三维变形规律
- By experiment, we knew the nitriding deformation rule of joint bearing and improved the technology method. 通过实验,掌握关节轴承氮化变形规律,改进了工艺方法,在提高零件精度和质量的同时,降低了生产成本。
- The deformation rule and displacement of inner-hole were also presented, and polynomial fitting was applied to the displacement of inner cavity in a sectional way. 研究了内腔位移分布情况和内孔变形规律,并分段对内孔位移做了多项式曲线拟合;
- The 3D Deformable registration can be used to rectify the geometric deformation of DTI and evidently improved the quality of image. 采用3D配准的方法可以对弥散张量成像的几何畸变进行纠正,明显提高了图像质量。
- As the wavelet coefficient is affected by threshold during wavelet decomposition, that is, noise is restrained, the model is closed to the deformation rule and prediction is more exact. 由于在小波分解过程中对小波系数作用于阈值,即对监测过程受到的干扰进行了消除或降低,从而使建立的预测模型更接近于变形体规律,预测更准确。
- The direct solution 3D deformation information 直接解算三维变形量
- In this paper, the large non linear FEM software MARC be used to calculate the 3D deformed distribution of the cold roll forming machine frame, slide seat and bolster plate. 摘要以大型非线性有限元软件marc为分析工具,建立接触分析模型,对冷滚轧机床机架、滑台及垫板进行三维有限元弹性接触分析,给出机床三维变形状态的定量描述。
- To deal with these problems,based on the part's deformation rules in SL,the types and deformation characteristics of different layer sections of parts were analyzed. 为此,基于零件光固化成型的变形规律,分析了零件的层片截面类型及其变形特性。
- Application of GPS to Metropolis 3D Deformation Monitoring GPS技术用于监测大城市三维形变
- Based on the cold roll forming steel,its characteristic of roll-forming and deforming rule was analyzed. 以冷弯型钢中的槽钢为例,分析了其辊弯成型的特点及变形规律。
- The mold shape is one major factor which affects metal deformation rules,but metal plastic deformation process can be controlled through the change of the mold shape. 模具几何形状是影响金属塑性流动的主要因素之一,通过改变模具的几何形状可以改变金属的塑性流动。
- By analyzing and studying the survey data,we have obtained ground movement and deformation rules and different kinds of angle parameters as well as prediction parameters under the condition of. 通过对观测资料的分析研究,获得了该区条件下高强度综放工作面开采时的地表移动变形规律、各种角值参数和预计参数。
- The belt deformation rule of linear friction belt conveyor 线摩擦传动带式输送机的胶带变形规律
- 3D deformable discrete element method 三维可变形离散元
- The Ching court began to feel its rule threatened. 清廷开始感到自己的统治受到了威胁。
- 3D deformable distinct element method(3DEM) 离散元(DEM)
- But this does not rule out unofficial discussions. 但这并不排除进行非正式的讨论。
- Analyzing the deforming rule of the material of turbine blade during the forging process and considering forging procedures, the more reasonable method of machining allowance process was put forward. 从锻造工艺出发,分析了叶片材料在锻造成形过程中变形的规律后,得出更为合理的余量设计的方法,来解决上述的难题。
- 3D deformable distinct element(3D DEM) 三维可变形离散元
- The rule is inapplicable to this occasion. 那规则对这一场合不适用。