您要查找的是不是：
- 但是,在进气和排气行程中,一些可燃混合气不可避免地进入排气系统,并且总会有一些燃烧物滞留在气缸中,致使燃料不能充分燃烧。"But it is wasteful of gasoline, as some mixture inevitably finds its way into the exhaust system on the combines intake/exhaust stroke, and there are always some combustion products left in the cylinder which reduce the rapid Burning of the fuel."
- 从排气下行管断开排气管（请参阅第11单元“排气系统和进气歧管”）。Disconnect the exhaust pipe from the exhaust down manifold (refer to Group 11, Exhaust system and Intake Manifolds).
- 四冲程循环发动机中,四个冲程的固定顺序是:进气、压缩、作功和排气。The four strokes in the four-stroke-cycle engine, in their proper order, are intake, compression, power, and exhaust.
- 热水供暖系统的积气和排气Air accumulation and venting in hot water heating system
- 气smell
- 电喷汽油机可变进气和配气系统的设计Design of Variable Inlet Charge and Timing System in Gasoline Engine of Electronic Injection
- 基本排气系统包括一个引擎排气歧管、排气管道、排气隔热罩、消音器和排气尾管The basic exhaust system consists of an engine exhaust manifold, exhaust pipe, exhaust heat shield(s), muffler and exhaust tailpipe
- 进气和排气阀intake & exhaust valves
- 进气和排气汽门Intake and Exhaust Valves
- 排气系统。磨料送风操作。固定位置封闭的安全操作规程和通风Exhaust Systems - Abrasive Blasting Operations - Ventilation and Safe Practices for Fixed Location Enclosures
- 柴油机进气和压缩过程中气缸内流动的研究A Study of the in-Cylinder Flow in Diesel Engines During the Induction and Compression Stroke
- 进排气系统Air intake and exhaust system
- 中心进气和高位垂直进气转静系旋转盘冷却品质比较Comparision of cooling effectiveness between central and high-positioned air inlet rotor-stator disk systems
- 进／排气系统Intake/Exhaust system
- 积洼是全部燃料蒸发得不充分和进气歧管类似影响的结果。The pudding results from the failure of all the fuel to vaporize and from the sorting effect of the intake manifold.
- 布朗合成氨工艺蒸汽/原料气和空气/原料气比值控制系统控制过程分析ANALYSIS OF CONTROL PROCESS OF STEAM/FEED GAS RATIO AND AIR/FEED GAS RATIO CONTROL SYSTEM FOR BLOM PROCESS OF AMMONIA PLANT
- 复合进排气系统Integrated intake-exhaust pipe
- 扩口式管接头是以油、水、气和各种腐蚀性材料为介质的管路系统中的一种连接件。The flared fitting is a connector in order the pipe line system, in which oil, water, gas and all kinds of corrosive materials are used as the medium.
- 在标准的六缸直列式发动机上,化油器被设置在进气歧管上3号和4号缸之间。On a typical in-line six-cylinder engine the carburetor is located on the intake manifold between cylinder 3 and 4.
- 压力管道输水进、排气系统的设计方法System Approach for the Design of Air Admission and Exhaust in Water Transmission Penstock
