您要查找的是不是：
- 最好把所有的磨光玻璃接头都装上聚四氟乙稀套管，以防止它们粘在一起。It is advisable to fit all the ground glass joints with polytetrafluroethylene sleeves to prevent their sticking together.
- 最好把所有的磨光玻璃接头都装上聚四氟乙稀套管,以防止它们粘在一起。It is advisable to fit all the ground glass joints with polytetrafluroethylene sleeves to prevent their sticking together.
- 膨体聚四氟乙稀Expanded polytetrafluoroethylene
- teflon (聚四氟乙稀)特氟隆
- 一种易燃的气态碳氟化合物，用于制塑料（聚四氟乙烯树脂）。a flammable gaseous fluorocarbon used in making plastics (polytetrafluoroethylene resins).
- 用聚四氟乙烯树脂、挤剂经糊膏挤出、延、燥和拉伸而成。Made of shaping Polytetrafluoethylene Resin with extrusion assistant by paste extrusion, press and stretch.
- 填料:通过保温绝缘气体来保护聚四氟乙烯或石墨免受低温影响。Packing: Teflon or graphite packing protected from low temperatures by a column of insulating gas.
- 聚四氟乙稀树酯Teflon resin
- 滑动层由成束的高强度聚酯和环氧树脂基增强PTFE(聚四氟乙烯)组成。The sliding layer consists of strands of high-strength polyester and reinforced PTFE (polytetrafluoroethylene) in an epoxy resin matrix.
- 这种模铸聚四氟乙烯环粘合在阀瓣表面的槽内，最大限度延长使用寿命。The molded PTFE ring is bonded into a groove in the disc face for maximum service life.
- 用聚四氟乙烯树脂加入一定量的助挤剂,采用糊膏挤出法成型后,再经高温烧结制成。Made of shaping Polytetrafluoethylene Resin added with a certain volume of extrusion assistant by extrusion than through high heat sintering.
- 先导式二位二通高温电磁阀，采用聚四氟乙稀硬密封结构，耐高温、腐蚀、能可靠，流量大、用方便，能控制多种流体。Guiding type two-position& two-port high-temperature solenoid valve adopts teflon hard seal structure, with reliable performance, large flow, high-temperature resistance, and corrosion resistance. It can control multiple fluid, with easy operation.
- 聚四氟蜡polyfluo-wax
- 聚四氟乙烯石棉teflon asbestos
- 多聚四氟乙烯polytetrafluoroethylene
- 聚四氟乙烯漆teflon finish
- 聚四氟乙烯电容器teflon capacitor
- 聚四氟乙烯膜Polytetrafluoroethylene film
- 填充聚四氟乙烯[化] filled polytetrafluoroethylene
- 聚四氟乙烯平片Teflon even piece
