您要查找的是不是:
- 搅拌器桨叶的水动力性能以及与搅拌槽的位置关系直接影响到搅拌的混合效果。The mixing results of agitator depend directly on dynamic performance of the agitator paddle and the position in mixing tank.
- 槽的groovy
- 和谐进行分间节的重复系列,每一系列在音阶上有新的位置A series of repetitions of a phrase, each in a new position on the scale.
- 槽manger
- 指南针上的磁针显示我们处在朝南的位置。The needle of the compass shows that we're facing south.
- 在早志留世,二郎坪海槽的珊瑚与浙川陆棚的笔石属华南生物省。During the Early Silurian, the corals of the Erlangping trough and the graptolites of the Xichuan shelf belonged to the South China Province.
- 3-一个消耗所有能量槽的系统,发动后可以必杀技取消必杀技。3- A new system where a special can be canceled into a special is present. Apparently it's a custom combo system which uses all power stocks.
- 一组连续的数字时间片段,每一数字时间片段在组内的位置可参考帧同步信号来标识。A set of consecutive digit time slots in which the position of each digit time slot can be identified by reference to a frame alignment signal.
- 某一永久性物体上预定的位置和高度上的测量标记,用作参考标记。a surveyor's mark on a permanent object of predetermined position and elevation used as a reference point.
- 改进扩压流量槽的结构能降低7分贝的噪音且不影响空气动力性能。By development of the MWE features we can achieve reductions of blade pass noise of 7dBA across the map with no impact on aerodynamic performance.
- W波段圆形槽波导径向盘的位置对阻抗的影响Effect of Postion of Radial Disk in W-Band Circular Groove Guide on Impedance
- 槽的尺寸,支架,酸的浓度,充电时间,极板的排列等与所描述的一样。Tank size, supports, acid concentrations, charging schedule, plate alignment, etc. are the same as described.
- 一个非常容易接近的人;这儿有石油和煤,但都不在可以开采的位置。a very getatable man; both oil and coal are there but not in getatable locations.
- 应用正交设计确定盘式削片机进料槽的最佳工作位置Determination of the Best Working Place for Feed-in Slot of Discal Chipping Machine by Orthogonal Design
- 詹姆斯来回开动车子,企图在狭窄的停车场里找到合适的位置。James moved the car backward and forward in his attempts to fit it in the narrow parking space.
- 组成墨槽的一支大直径的轴。用来供应油墨,并以它的转动角度来作输墨的调节。Duct roller A large diameter roller which are the main part of the ink duct.It supplies ink and meters ink quantity by the amount of rotation.
- 相对于一轴线的能够确定一个点在空间的位置的一个或一组数。a number that identifies a position relative to an axis.
- 问题不大,第二把血槽的处理相当难,另外刀面不一定是平面,角度和界限很重要。No big problem,it's quite difficult to renovate the fuller of the second piece.In addition it's not surely flat,angle and ambit are quite important.
- 可测量台阶高度,槽宽,在二维方向确定孔或轴的位置。Measure the height of steps, width of grooves, position of bores or shafts in.
- 单曲线脚包括凹弧饰(具有四分之一圆的轮廓的凹面)、凹形边饰(深凹面)、凹槽饰(开槽的)"Single curved moldings include the cavetto (concave, with a quarter-circle profile), scotia (deep concave), flute (grooved),"